Yanmar l70 parts

Types of Yanmar L70 parts

Like other diesel engines, the Yanmar L70 needs many functioning components to run well. Broken components may require Yanmar L70 parts replacements. All of these parts work together to keep the engine running strongly and smoothly. Here is a short list of essential Yanmar L70 parts and their functions.

• Yanmar L70 engine block parts: The engine block is typically made from cast iron or aluminum alloy. The alloy is lightweight but strong enough for the engine to work well. The cylinder head of the block is at the top, where it houses the cylinders and other moving parts. The engine block's material needs to withstand great heat and pressure from fuel combustion.
• Yanmar L70 cylinder and piston parts: Within the engine block are the cylinders, which look like round metal tubes. Up to four round tubes are usually found in most cylinder engine blocks. The cylinders allow the pistons to fit and move around. The pistons are round, flat discs that move up and down within the hollow cylinder. The cylinder and pistons are very important parts. They form a simple move-up-and-down-space where fuel burns to produce power for the engine.
• Yanmar L70 gasket and seal parts: Gaskets and seals are used to block the escape of gas or liquid fluids through small spaces in the engine. The gaskets are flat, thin, and made from rubber or silicone, while seals are usually round. Together, the gaskets and seals stop oil leakage and prevent dirt or dust from getting into the engine.
• Yanmar L70 filter and clutch parts: The filters, like the air cleaner and fuel filter, trap harmful dirt and clean air or gasoline needed for the engine to work. The function of the clutch is to hook up and pull apart the engine parts that rotate. It stops the engine from wearing out too fast. When pressed, the clutch disengages the rotating parts so other engine parts can perform their functions.
• Yanmar L70 fuel system parts: The fuel system parts are the injector nozzles, fuel pump, and carburetor. Yanmar L70 nozzle injector parts help spray fuel directly into the engine cylinders. The small module called the carburetor mixes air with gasoline to form a mixture of fine bubbles called gasoline vapor. The fuel pump moves gasoline from the tank to the vehicle's engine.

Specifications and maintenance of Yanmar L70 parts

Specifications

• Clean water pump:

  It has a 12L/min max flow rate, a maximum head of 30m, and a 1m suction head. Its power is about 0.5kw/0.75hp, and it works with gasoline or diesel engines through belt-driven or engine coupling.

• Fan belt:

  This fits Yanmar models L, LB, L100, L70, L90, etc. Its outer circumference is 750mm, its top width is 13mm, and its AR design (automotive-type) is for small engine applications. Another dimension of it is 780mm/13mm/15mm.

• Fuel filter:

  The sedimenter or pre-filter is at the bottom of the fuel tank and has a capacity of 500ml. The main inline fuel filter capacity is 100ml.

• Glow plugs:

  It has a mono block design with an M8 thread, ceramic insulator, and an overall length of 123mm, fitting Yanmar marine (e.g., 1GM10) and diesel generator models.

• Nozzle:

  It has a high precision, optimal fuel atomization, and an enhanced spray pattern. This design improves combustion efficiency, increases fuel economy, and minimizes emissions.

Maintenance

• Regular cleaning:

  Users need to clean the Yanmar L70 parts regularly to remove dirt, dust, and debris. They can use a mild detergent and water to clean the parts, and next, they need to dry them thoroughly.

• Lubrication:

  Users need to lubricate moving components, such as bearings and chains, regularly. They can choose the appropriate lubricant according to the manufacturer's instructions. The proper lubrication can help reduce friction and wear.

• Inspection:

  Users should inspect Yanmar L70 parts regularly. They need to check if there are any signs of damage, wear, or loose immediately to identify potential problems and take necessary measures to maintain them in time.

• Follow the maintenance schedule:

  If Yanmar L70 parts have maintenance schedules, users need to follow them. It may include regular cleaning, lubrication, replacement of specific components, etc. Adhering to the maintenance schedule can ensure the optimal performance and longevity of the parts.

Uses of Yanmar L70 parts

Yanmar has been in the industry of providing reliable, efficient, and powerful marine and industrial diesel engines since their inception. Many businesses need to understand that after the engine's elimination, the remaining engine parts can be helpful for other machinery.

The Yanmar L70 parts that do not make it out of the boat or heavy machine are still valuable and can be separated to be utilized in other pieces of equipment. Following are some common ways Yanmar L70 parts can be used:

• Replacement: Yanmar parts can be used in their original form as replacements for faulty or damaged parts of machinery. Identifying Yanmar L70 parts by part numbers can help match the specified part for a specific piece of machinery or equipment.
• Repurposing: The more creative way to use a Yanmar part is by repurposing it into something entirely different. For example, a Yanmar L70 cylinder head can be used as a decorative garden table or a planter.
• Repairing: Damaged marine equipment can be repaired with Yanmar parts. Doing this can save a significant amount of cost that would have been involved in purchasing an entirely new piece of equipment.
• Restoring: Certain vintage boats with marine engines produced by Yanmar can be restored to their original condition with the help of authentic Yanmar parts.
• Maintaining: Regular maintenance of a piece of machinery requires the use of several genuine and aftermarket parts of the company. If one is to schedule regular maintenance of marine boats and heavy equipment, it is essential to have Yanmar parts on hand to maintain the machine's integrity and performance.
• Collecting: Marine enthusiasts and engine makers sometimes collect rare and unique Yanmar parts for resale at a later time or for their exclusive collection.

How to choose Yanmar L70 parts

Selection of Yanmar L70 parts should be done carefully, keeping the special requirements of the Yanmar L70 mini excavator in mind. Here are some things to consider when selecting Yanmar L70 parts.

• Quality of the parts: When selecting Yanmar L70 parts, buyers should choose the ones with good quality. Only good-quality parts can ensure good performance and long service life. They can also reduce the risk of early damage and the need for frequent replacements. For example, the Yanmar L70 engine parts need to be of good quality to ensure the engine works well.
• Compatibility: Because every equipment model is unique, its requirements are different. If the parts do not fit well with the machine, they can’t work well. They may even cause damage to the equipment. Buyers should ensure that the Yanmar L70 mini excavator parts they choose are suitable for the Yanmar L70 model. They can do this by referring to the model numbers or specifications corresponding to the parts.
• Supplier: When buyers are choosing Yanmar parts, they should consider the suppliers. A good supplier can offer a wide range of authentic and high-quality Yanmar parts. Also, many good suppliers offer excellent after-sales services. They can provide support and services when buyers need them. Some good suppliers also have a quick delivery service that can ensure buyers receive their orders on time.
• Application requirements: Consider the application needs of buyers. They should think about the conditions under which their equipment operates. Also, they need to take into account the specific functions they seek from the parts. For instance, if the mini excavator often works in dusty environments, buyers may need to select a higher-performance air filter to ensure the engine maintains optimal combustion.
• Price: Buyers need to remember that equipment parts are usually consumables. They need to be replaced periodically. Buyers should consider the cost-effectiveness of the parts when selecting them. They should balance the performance, quality, and price of the parts to ensure a good return on investment for the business.

Yanmar L70 parts FAQ

Q1: Is it possible to rebuild a Yanmar diesel engine?

A1: Yes, one can rebuild a Yanmar diesel engine. Many Yanmar engine parts are available to help one rebuild the engine, including the vital ones like the piston, piston ring, cylinder head, crankshaft, and more.

Q2: Do aftermarket Yanmar L70 parts offer the same quality as original ones?

A2: Many high-quality aftermarket parts are available that often offer the same quality as original ones. Buyers can look for reputable brands to ensure they are getting high-quality parts.

Q3: Are Yanmar L70 parts hard to find?

A3: While some parts can be tricky to find, popular Yanmar L70 parts are readily available. This includes things like the oil filter, fuel filter, air filter, cylinder head gasket, and others.

Q4: Can one find custom Yanmar L70 parts?

A4: Yes, if one is looking for a particular custom Yanmar part, they can find it through specialty suppliers.