All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(569 products available)
Lab instrument suppliers provide these different types of vacutainer centrifuges in bulk.
This vacutainer centrifuge does all the hard work, like speeding up and slowing down automatically when needed. It spins the blood tubes quickly but carefully since different blood types need different spinning speeds. No manual speed or time adjustments are needed; it does everything automatically, which helps cut mistakes in busy labs with many tube types. Its smooth, automatic changes in speed make it a good choice for special blood tests that need precise spinning to separate blood parts. It usually has settings for low, normal, and high ranges of blood pressure in tubes, so it won't break any delicate tubes. The automatic system helps labs run efficiently without constant checking of the machine.
This centrifuge fits right on the lab desk and spins blood collection tubes to separate the different parts of the blood quickly. It can hold four to eight tubes in rotating slots called rotors. Most models can spin between 2,500 and 5,000 RPM, which is fast enough for many tests but slower than some larger models. This compact, low-speed centrifugal blood separator works well for different blood tube types without needing extra adapters. It is used for routine tests and small sample batches. The light weight and small size allow it to be moved easily if needed.
This centrifuge spins blood collection tubes without going too fast or slow. It can rotate between 1,000 and 3,000 RPM, which helps separate blood but does not spin so fast that it breaks the tubes. The gentle, even spinning helps the different blood parts separate slowly and properly for tests. It works well for separating serum or plasma from blood samples without damaging the cells or mixing the parts up. It can be used all day without overheating or wearing down. This centrifuge is a good choice for smaller labs that need reliable, low-speed sample separation.
This centrifuge spins blood collection tubes at very high speeds, often between 10,000 and 15,000 RPM. The fast spinning separates the blood quickly into its different parts, which is helpful for complex tests. It can handle tubes filled with tricky substances like anticoagulants or thick blood types. The high speed helps separate blood, plasma, and other parts tightly packed at the bottom of the tube. Many models come with rotors that can hold several tubes at once. Its powerful motor enables it to run for long hours without slowing down or getting too hot. This makes it suitable for big lab work.
Here are some fields where wholesaler vacuum tube blood centrifuges are applied.
These labs frequently use tube centrifugation for blood tests. Centrifuges spin blood in tubes to separate it into parts for easier testing. This helps labs quickly and accurately prepare samples for many tests. Most clinical labs use automatic or high-speed centrifuges to separate blood fluid from cells for specialized tests.
Centrifuges are commonly found in research labs that work with blood samples. They spin samples to separate plasma, serum, and cells for experiments and studies. High-speed centrifuges can separate complex mixtures quickly and precisely, which is good for detailed test preparations. These labs often need large-capacity models to handle multiple samples at once.
These places use vacutainer centrifuges to prepare blood products for storage and transfusion. Centrifuges separate whole blood into red blood cells, platelets, and plasma for easy storage and use. Blood banks benefit from using automatic centrifugal blood separators that can switch speeds without help, as this reduces work while keeping the process organized.
These labs need centrifuges to help with test samples. Centrifuges prepare tube samples by separating liquids from solids, which is crucial for many diagnostic tests. Low-speed models work well for routine test samples, while high-speed models handle special tubes needing quick, precise separation.
These industries rely on vacutainer centrifuges during drug development and testing. They separate mixtures to isolate components needed for different tests and to ensure safety and effectiveness. High-capacity centrifuges fit into lab workflows and improve productivity by processing many samples for research and quality checks.
When selecting an instrument for Vacutainer tube sterile preparation, buyers should pay attention to these specifications and features.
A vacutainer centrifuge can spin blood tubes from 2,500 to 7,000 RPM, depending on the model and type of required blood tests. This range of speeds separates different blood parts, like cells and plasma, for lab tests. The centrifuge can spin up completely in less than 20 seconds, which is important when labs need to test samples quickly. Most centrifuges can hold between 8 and 12 blood collection tubes at once, but larger models can spin more than 30 tubes simultaneously. The heating feature keeps samples at a steady temperature to prevent changes in the blood before testing. Many models can run for several hours without overheating.
Installing a Vacutainer centrifuge is a simple process that can be done quickly. The first step is to find a flat, stable table in the lab where the machine will not shake or wobble. The second step is to plug the machine into a regular power outlet, using an extension cord if the counter is far from the wall. Next, the machine lid should be opened, and the spinning part called the rotor should be locked into place. Most rotors just snap or screw in, so changing them for different tube sizes is easy. After the rotor is set, the lid should be closed tightly so nothing breaks when the machine is spinning. Then, the speed and time should be set for the type of test, and the start button can be pressed. The machine can then be left to finish spinning, and an alarm will ring when it's done, letting the samples be taken out safely.
To take care of the Vacutainer centrifuge, it should be cleaned after each use by wiping the inside and rotor with a soft cloth. The rotor should be taken out every week or month, depending on how much the machine is used, and cleaned with soap and water. It is also important to make sure the rotor and balance weights, if any, are not cracked or damaged. The centrifuge's motor and belt, if it has one, should be checked for dust buildup every few months, and a small brush can be used to clean it. The machine should be taken to a repair shop or sent to the company if there are any strange noises or problems. The factory recommended maintenance schedule should be followed to keep the machine in good shape for as long as possible.
Materials and Durability
Good vacutainers are made of strong steel alloys or plastics to last long in busy workspaces. The materials that are used have to be able to resist many chemicals so that their parts won't get damaged from blood or other liquids. The parts that move need to be well made and carefully checked for tiny mistakes so they do not wobble or shake when doing their work. Machines made with quality materials have less chance of breaking or needing repairs. A long-lasting machine helps the lab always be ready to test samples.
Precision and Performance
The machine must spin or rotate with great accuracy to separate blood without mixing it up. If the spinning is uneven or the speed changes too much, it can mess up tests by not separating the parts properly. The best machines have rotors and balanced moving parts that ensure smooth motion at any speed. This precision is critical for getting accurate test results. The lab will need fewer repeat tests if they use a machine that performs its job exactly right.
Noise and Vibration
Noise and shaking matter when picking a machine for the lab. Loud machines make it hard for workers to hear each other, the phone, or other important sounds in the lab. Too much shaking can damage the machine or its delicate parts over time. Labs may choose an enclosure if noise is too loud or too much vibration transfers to nearby items. Quieter machines help workers stay focused on their important tasks without distractions.
Emergency Features
The blood vacuum tube holder needs special emergency buttons or switches that let it stop quickly if something goes wrong. This quick-stopping ability keeps samples safe and prevents the machine from causing harm. Emergency switches should be easy to reach and find, even when the machine is busy. Any accidents that harm workers or damage equipment will not happen with these emergency features.
Protective Covers and Safe Locks
Safety lids that cover the inside parts of the machine keep users from reaching dangerous areas while the machine spins. These covers lessen the chances of accidents and hurt hands. Many machines lock or seal the cover so it cannot be opened while running. This safety lock prevents injuries by making sure the user cannot touch the machine at the wrong time. Safety lids and locks are good for following safety rules and keeping the workspace secure.
Regular Safety Checks
Safety problems can be reduced by doing frequent checkups on the parts that move and other important pieces. Workers should understand how the machine works so they can use it properly. Labs must develop a good plan to test all parts for safety. Always checking parts and knowing what to do will lower the chances of injuries or harm. This helps workers stay safe and get their tasks done without worry.
A1. The Vacutainer system tube holder is designed for use with Vacutainer tubes. It holds the tubes steady while blood samples are spun around for testing. The holder powers a vacuum that keeps the tubes in place. This lets the blood be evenly divided into different parts for accurate test results. Its tight, secure fit ensures the tubes do not move or tilt during centrifuging.
A2. The vacuum tube blood centrifuge has parts made from strong steel, plastics, and aluminum alloys. Steel gives a solid, tough frame that lasts. Aluminum makes the spinning parts very light but still sturdy. Plastics are used for some outer parts that need to be low in weight. These materials hold up well during the long hours of spinning.
A3. The latest models bring useful updates like running more easily and quietly, connecting to computers, and being more careful with settings. Sensors now help the centrifuge run faster and more exactly. It also connects to lab computers to send test data and track things. The machine runs smoothly without shaking much, which helps labs work faster.
A4. The Vacutainer tube holders work well in medical labs, research labs, blood banks, and more. They prepare blood samples by spinning them to separate the parts for important tests. Hospitals, labs, and any place that does health tests or does research needs them. They help quickly and accurately get the results needed for diagnosis and studies.
A5. Workers should wipe the inside after each use and fully clean it often. Moving parts should be looked at for wear. It should be checked for dust. Services from the maker should be scheduled for any big fixes. Following these easy steps keeps the machine spinning safely for many years.
