(1330 products available)
Ready to Ship
Ready to Ship
Ready to Ship
Ready to Ship
Ready to Ship
Ready to Ship
Arduino temperature and humidity sensors come in various types, each suited to different applications and accuracy requirements.
DHT11/DHT22
The DHT11 and DHT22 are among the most used Arduino components. These combined sensors and ICs measure temperature and humidity in one operation. Meanwhile, the DHT11 is affordably priced and measures from 0 to 50 °C and 20 to 80% RH with basic 90% accuracy. On the other hand, the DHT22 is more advanced. It can measure from -40 to 80 °C and 0 to 100% RH with improved accuracy and a broader range. Both gave out the data through a single digital pin, making them convenient for light tasks or intermittent data logging in DIY weather stations, greenhouses, or educational activities.
AM2301
The AM2301, functionally analogous to the DHT21, is a lower-priced alternative to the AM2302. It provides basic but serviceable measurements of temperature and humidity for budget-conscious applications. This sensor is ideal for users needing a straightforward solution without requiring high precision. It can be found in numerous environments, such as home automation systems, where it tracks temperature and humidity for system performance and user comfort control.
AM2302/AM2303
The sensors are more accurate variants of the AM2301 and offer superior precision and reliability. The AM2302, for example, enhances the stability of measured humidity and temperature in critical environments like museums or laboratories. These sensors are usually housed in robust protective casings, giving them resilience in unfavorable environments. Such features guarantee longevity and dependable performance, making them suitable for enterprises requiring uninterrupted environmental monitoring.
BCM2837
The BCM2837 is not a sensor but rather a key component of the Raspberry Pi 3 model, which can be used with Arduino in projects requiring advanced processing capabilities or multiple sensors. The Pi can manage complicated data from environmental sensors and maintain real-time subsequent communications. The versatility makes it an appropriate selection for development projects that need broad mobility with numerous case applications. The Pi is ideal for building intricate systems that integrate Arduino with various sensors and communication modules for IoT.
DS18B20
The DS18B20 is a digital temperature sensor that operates through the One Wire communication system. Importantly, it can measure at temperatures within -55 to 125 °C, greatly making it appropriate for dynamic and extreme environments. Also, multiple DS18B20 can be connected to a single Arduino pin, thus making them appropriate for systems requiring many measurement points. Its accuracy, durability, and expandability have found many applications in home automation, where users can monitor water pipelines and heating systems and receive alerts on temperature thresholds.
Manufacturing and Production Facilities
In industrial manufacturing and production facilities, an Arduino humidity sensor monitors both temperature and humidity to maintain product quality. In such environments, the precise levels of temperature and humidity are crucial. This is especially true for industries such as food processing, pharmaceuticals, and electronics manufacturing. In these industries, fluctuations can greatly affect product quality and equipment efficiency.
For instance, in food processing, improper levels can lead to spoilage or affect food safety. In pharmaceuticals, it can affect drug efficacy. That is why these sensors enable real-time monitoring and help automate HVAC systems to maintain the appropriate environment.
Warehouse and Inventory Management Systems
Often stored in large warehouses, chemicals, raw materials, and finished goods are affected by humidity and temperature. An Arduino-based temperature and humidity sensor is used by many industrious businesses to monitor and control conditions within storage areas. This applies particularly to sensitive items such as pharmaceuticals, perishable products, and electronic components.
In contrast, fluctuations adversely affect such products. Hence, the sensors help maintain ideal storage conditions, protecting inventory quality and preventing spoilage or product damage. Additionally, data from the sensors can be integrated into inventory management systems to automate the monitoring of warehouse conditions. This helps ensure compliance with regulations and improves efficiency.Agriculture and Greenhouse Management
It is a crucial part of industrial agriculture and greenhouse management. Temperature and humidity control greatly impact crop yield and quality. These sensors enable precise control of these environmental factors. For instance, in a greenhouse, an Arduino sensor can help monitor the conditions within the greenhouse. It can then drive automated irrigation systems, fans, or heating units to keep plants healthy.
This maintains optimal conditions for various growth stages. Moreover, data is often logged over long periods to analyze trends and improve future growing conditions.
Data Centers and Server Rooms
Temperature and humidity are critical factors in the performance and reliability of server rooms and data centers. Excess heat or moisture can cause hardware failures and reduce efficiency. Hence, an Arduino humidity and temperature sensor is used by industries to provide real-time monitoring of conditions in such facilities. It can then be used to optimize cooling systems and maintain ideal operating conditions.
Furthermore, real-time alerts ensure proactive interventions before problems arise. This increases the dependability of IT infrastructure and minimizes downtime.
HVAC Systems in Commercial Buildings
Precision control of temperature and humidity is critical in commercial buildings such as hospitals, hotels, or offices. In these spaces, comfort, air quality, and system efficiency depend on proper environmental control. Hospitals, for instance, must keep specific ranges to ensure patient safety and medication effectiveness. This is why industries have started using Arduino-based temperature and humidity sensors to optimize HVAC system performance.
The devices facilitate better energy management, leading to cost savings and environmentally friendly operations. Plus, these sensors provide data for predictive maintenance.
Measurement Ranges
The DHT11 sensor can measure humidity from 20 to 80% with an accuracy of ±5% and a temperature range from 0 to 50℃ with an accuracy of ±2℃. On the other hand, the DHT22 measures humidity from 0 to 100% and temperature from -40 to 80℃ with ±0.5% and ±0.5% accuracy, respectively. Thus, users are able to select the right sensor based on the project requirements.
Digital Output
As for the output, the DHT11 and DHT22 use a single digital pin to give combined data. This allows the programmer to use a simple Arduino library to read the temperature and humidity from the sensors with minimum effort. Remember that the DHT11 provides data every 1 second, while the DHT22 supports short intervals down to 0.5 seconds.
Power Requirements
Both sensors operate from 3 to 5V DC, so they can be conveniently powered by most Arduino boards. The sensors use 0.5W during measurements and drop to 0.3W when in standby mode.
Interfacing
Each of the Arduino temperature and humidity sensors requires one digital pin to communicate. The Arduino uses a simple command to read data from the pin. The library handles everything behind the scenes.
Calibration
The DHT11 and DHT22 digital sensors are factory calibrated with precise humidity and temperature values. They ensure accurate readings with minimal user intervention, making them ideal for hassle-free applications.
Installation instructions on a temperature and humidity sensor arduino
The DHT11/ DHT22 Arduino humidity and temperature sensors are easy to set up. The first step is to connect the sensor to the Arduino board. Use a jumper wire to connect the sensor's VCC pin to the board's 5V pin. Then connect the GND pin on the sensor to the Arduino's ground pin. Next, connect the data pin on the sensor to any digital pin on the Arduino. Most users use the D2 pin for convenience.
Include a pull-up resistor of 10k ohms between the data pin and the VCC pin for improved data stability. After that, plug in the Arduino to the PC using a USB cable. Open the Arduino IDE and install the DHT.h library if it is not yet installed. Users should create a new sketch and include the DHT.h library. Then define the sensor type and the pin where the data line is connected.
Also, create a DHT object using the DHT pin and type. Finally, upload the example code to the Arduino IDE for displaying sensor data on the serial monitor. Monitor the values and enjoy reading temperature and humidity wirelessly.
Maintenance instructions on a temperature and humidity sensor arduino
The good part about the DHT11 and DHT22 is that they require no periodic maintenance to ensure accuracy in readings. The users are, however, advised to keep the sensors clean and dry to improve their lifespan. Regularly inspect the sensors to check for any debris or moisture accumulation. If found, carefully wipe it off with a soft, dry cloth. Never use water or any liquid directly on the sensors.
For physical protection of the sensor, users should enclose it in a protective casing that is shielded from dust, moisture, and direct sunlight. Also, even though the sensors are housed in a dustproof casing, users are advised to open the casing every few months to inspect the sensor for dust accumulation.
Repair
The most common and easy way to repair such sensors is by replacing them with new ones after diagnostics. But first, users should check for any broken wires or poor connections. Fix the broken wires or re-establish the connections where necessary. Also, make sure the sensors are connected to the right pins. The Arduino Editor Serial Monitor can be used to troubleshoot by checking if the sensors are getting values.
Accuracy and Precision
Quality is primarily determined by accuracy and precision. Accurate sensors give correct humidity and temperature readings. At the same time, precise ones consistently provide the same results under unchanged conditions. These ensure reliable data for critical industrial applications such as pharmaceuticals or food storage. This helps prevent system failures or product spoilage that may occur from inaccurate readings.
Calibration
How the sensor is internally calibrated before leaving the factory affects its accuracy and reliability. Only utilize products that have been properly calibrated by the manufacturer to ensure optimal performance. Periodic re-calibration may also be necessary, particularly in industries with strict regulations like pharmaceuticals. So, choose sensors that can be easily re-calibrated.
Build Quality and Materials
Quality man-made materials build Arduino humidity sensors to enhance their durability and reliability. As manufacturers use premium materials for the sensing elements, printed circuit boards, and protective casing, they become more resistant to wear, tear, humidity, and temperature extremes. This directly impacts performance since users can rely on these sensors longer for consistent readings in harsh industrial atmospheres.
These are in contrast to lower-quality sensors, which often fail or degrade in performance over time. This often leads to increased operational costs and potentially hazardous situations due to inaccurate readings.
Response Time
A good-quality sensor provides quick responsiveness to change in environmental conditions. This is crucial in real-time monitoring and control applications. Think about data logging or triggering automated responses in HVAC systems. Choose sensors that provide timely and accurate readings for better process control and keeping optimum conditions in storage facilities, greenhouses, and industrial spaces.
Electrical Safety
Humidity and temperature sensors usually operate on low voltage. But, it is still important to ensure proper insulation of wires and connections to prevent electrical shocks or short circuits. Follow the manufacturer's instructions for power supply requirements and ensure that all electrical components are properly grounded to minimize the risk of electrical hazards.
Protective Housing
Since most of these sensors are exposed to harsh industrial environments, use protective housing to shield the sensor from dust, moisture, and physical impact. This is how users prolong device lifespan and maintain accuracy in readings. Such users operate in conditions where sensors can easily get damaged. So, going for rugged casings or enclosures for the sensors is really significant. It prevents not only damage to the device but also mitigates the risk of flying debris or broken components injuring personnel.
Handling Calibrated Sensors
Be extra careful when handling factory-calibrated sensors. Its internal precision can easily get compromised by improper handling. Hence, avoid touching the sensing elements. Also, be careful not to drop or subject the sensor to unnecessary vibration, as this could affect the calibration and accuracy.
Regular Maintenance
Regular maintenance is key not only to prolong the sensors' lifespan but also to ensure they operate safely. Follow maintenance schedules diligently. It is mandatory to check for signs of wear, tear, or moisture accumulation. Immediate repair or replacement of damaged sensors is vital. Continuing to operate with compromised sensors can provide faulty data that may lead to unsafe conditions in industrial spaces.
The DHT11 is affordably priced and measures from 0 to 50 °C and 20 to 80% RH with basic 90% accuracy. Meanwhile, the DHT22 can measure from -40 to 80 °C and 0 to 100% RH with improved precision and a broader range.
They are ideal for intermittent monitoring because they give basic but usable accuracy for non-critical applications. On the other hand, DHT22 is suitable for continuous monitoring because it provides data every half a second.
No, these sensors are not water-resistant. Users must house them in a dustproof and waterproof casing to prevent failure in harsh industrial environments. This also protects them from moisture, dust, and extreme temperatures. Consider humidity-proof enclosures with desiccants for harsh operating conditions.
The sensors work seamlessly with the Arduino boards and operate from 3 to 5V DC. This means they can be conveniently powered by most Arduino boards, thanks for which they become a simple addition to any DIY or professional project.
Yes, industries widely use Arduino components in manufacturing, agriculture, and telecommunications. They help DHT11 keep costs low in moderate environments and the DHT22 in critical areas requiring precise humidity control. Both sensors enable real-time monitoring and quick response. That is how they assist in minimizing downtime and optimizing processes.
浙公网安备 33010002000092号
浙B2-20120091-4