Solenoid valve sensor tap

Types of Solenoid Valve Sensor Tap

A "solenoid valve sensor tap" is a term that combines three components: sensor valve, solenoid valve, and tap. To better understand this product, it is important to look at each component.

A sensor valve is a tap with a sensor that detects human movement. The sensor is commonly known as an infrared sensor. It turns on the water automatically when a hand is placed near the tap and turns it off automatically after a few seconds or when the hands are removed from the water source. The automatic on and off movement of the sensor tap helps to conserve water and promotes hygiene, as people don't have to touch the tap to turn it on or off. The sensor infrared sensor is powered by batteries.

A solenoid valve is an electromagnet device used to control electrical fluids. It has a coil that creates a magnetic field when electrical energy is connected. The magnetic field then moves a plunger inside the solenoid, opening or closing the valve. The tap is popularly used in automatic systems because it can be controlled remotely through electrical signals.

In this context, a "solenoid valve sensor tap" refers to the type of faucet that uses a solenoid valve to control the flow of water in response to an infrared sensor detection. When the infrared sensor detects the presence of hands near the tap, it sends a signal to the solenoid valve, which opens and allows water to flow. Once the hands are removed from the sensor's range, the solenoid valve closes, stopping the water flow. This automatic on and off helps conserve water and promotes hygiene.

The solenoid valve sensor taps can be classified into various types. They include:

• Mechanical Taps: These are the most basic kind of solenoid valve sensor taps. They use mechanical energy instead of electrical energy to control the flow of water. A sensor is not integrated into the system. The taps are easy to use and install but consume more water.
• Battery-Powered Taps: These taps use battery power to run the sensor and solenoid valve. They are easy to install since no electrical connections are required. They are ideal for places where electrical power is not available. The taps are also hygienic because they don't need hands to operate. However, the batteries must be regularly replaced.
• AC Powered Taps: Unlike battery-powered taps, AC-powered taps are directly connected to an electrical source. They provide a consistent power supply to the sensor and solenoid valve, ensuring reliable operation. The taps are efficient and commonly used in public restrooms. However, installation requires an electrical outlet and may not be suitable for all locations.
• Universal Taps: These sensor valve taps can be battery-powered or AC powered. They are flexible and can be installed in various settings. The taps come with different finishes and designs, making them suitable for both residential and commercial applications.

Function and feature of solenoid valve sensor tap

• Automatic On/Off Control:

  The solenoid sensor tap valve controls automatic on/off water flow. It has an infrared sensor that detects hand movement near the tap. When the hand is in the sensor range, the valve opens and water flows. Removing hands from the sensor activates the valve and stops water. This automatic control reduces water wastage by shutting off the flow when not in use.

• Touchless Operation:

  Hands-free operation is one major benefit of sensor taps with solenoid valves. They work without touching the faucet, which helps reduce germ and bacteria spread. This makes them hygienic and suitable for places like hospitals and kitchens where hand hygiene is vital. The infrared sensor detects hands near the tap and opens the valve to release water for use.

• Water Flow Regulation:

  The solenoid valve in a sensor tap controls water flow regulation. It opens and closes quickly to control flow rate and maintain consistent water pressure. The valve can be set to provide a specific amount of water per activation, which helps save water. It's also possible to adjust the sensor's detection range and the time the valve stays open, giving users control over the water flow.

• Battery or AC Power:

  Sensor taps with solenoid valves can be powered either by batteries or directly from the AC power supply. Battery-operated taps offer installation flexibility and don't require electrical wiring, making them suitable for places without power sources. AC-powered taps provide a continuous power supply and eliminate the need to change batteries periodically.

• Durable Construction:

  These sensor taps are built with long-lasting materials that can withstand frequent use. Common materials used are brass and stainless steel, which resist corrosion and maintain their appearance over time. The solenoid valve and sensor components are encased to protect them from water damage and ensure the tap operates smoothly for years.

• Easy Installation and Maintenance:

  Sensor taps are simple to install and maintain. Most models need only a single-hole installation on the sink, making the process straightforward. The main parts requiring periodic checking are the sensor and solenoid valve. These components are easily accessible, and problems can be diagnosed and fixed quickly, which keeps the tap working well.

Applications of Solenoid Valve Sensor Tap

Sensor taps with solenoid valves are widely used in commercial and industrial environments where hands-free operation is preferred. Common applications include:

• Public Restrooms

  In public restrooms, sensor taps with solenoid valves are installed to reduce the spread of germs in high-traffic areas. The hands-free operation minimizes contact with commonly touched surfaces, promoting better hygiene for restroom users. Sensor-activated faucets are also beneficial in airport terminals, shopping malls, and other venues with high visitor volumes.

• Hospitals and Clinics

  Hospitals and clinics install sensor taps with solenoid valves in patient rooms, bathrooms, and surgical facilities. The hands-free operation helps prevent the transmission of pathogens among medical staff, patients, and visitors. This is especially important in maintaining a sterile environment in operating rooms and preventing healthcare-associated infections.

• Restaurants and Food Preparation Areas

  Sensor taps with solenoid valves are used in commercial kitchens and restaurant restrooms. The hands-free operation reduces the risk of cross-contamination when washing hands or food preparation utensils. Sensor-activated faucets are also easy to use when handling food items or kitchen tools that require constant water flow.

• Office Buildings

  Office building restrooms often have sensor taps with solenoid valves for convenience and hygiene. The hands-free operation is useful in busy work environments where employees frequently use the restroom. Sensor taps can also be integrated with building management systems to monitor water usage and control faucet operation.

• Hotels and Hospitality Establishments

  Hotels install sensor taps with solenoid valves in guest bathrooms to enhance hygiene and provide a luxurious experience. The hands-free operation is appealing to guests and reduces the need for frequent faucet cleaning. Sensor taps are also used in hotel lobbies, conference rooms, and dining areas.

• Educational Institutions

  Schools and universities install sensor taps with solenoid valves in restrooms and science laboratories. The hands-free operation is important in preventing the spread of germs among students and staff. In laboratory settings, sensor-activated faucets provide precise water control for experiments and reduce the risk of chemical spills.

How to choose solenoid valve sensor taps

There are numerous sensor taps in the market, so it is important to consider some things to ensure the right choice. Here are some of the things to be considered when choosing an electronic sensor tap.

• Location and Application

  Where the sensor valve taps are installed play a major role in their selection. Different sensor taps are suitable for various applications and locations. For instance, durable and robust sensor valve taps are ideal for high-traffic areas like commercial bathrooms and kitchens. Such areas require sensor taps that are resistant to damage and corrosion. On the other hand, for residential use, sensor taps with a wide range of finishes and designs can be installed. This is because there is no need for a residential bathroom or kitchen to be resistant to damage.

• Power Source

  Sensor taps are powered in different ways. Some of them use batteries, while others are connected to the electrical system of a home. For areas where there is no electricity, sensor taps that use batteries are ideal. Conversely, sensor taps that are installed in places with a reliable power source depend on electricity. It is important to choose a sensor tap providing a reliable power source. This ensures it works efficiently.

• Water Conservation

  All types of sensor taps for bathrooms and kitchens help to conserve water. This is because they are activated by hand movements. However, some sensor valve taps are more efficient than others. This is because they have advanced sensors that reduce water wastage. Therefore, if water conservation is a priority, it is important to look for a model that offers this feature.

• Design and Finish

  Sensor taps come in different designs and finishes. Examples of common designs and finishes are brushed nickel, chrome, and stainless steel. The design and finish of the sensor tap are important when it comes to the appearance of the bathroom or kitchen. Sensor taps are part of the fixtures, and their appearance should at least complement the space where they are installed.

• Installation Requirements

  It is also important to consider the requirements for installing sensor valve taps. Some of them require advanced plumbing knowledge to be installed, while others are easy and can be installed by anyone. It is therefore important to consider the installation requirements to avoid challenges during the installation process.

solenoid valve sensor tap Q&A

Q1. What is a sensor tap?

A1. Sensor taps are also known as hands-free or touchless taps. They are popular in public and commercial restrooms because they allow for automatic water flow when the hands are placed under the faucet. This reduces the need to physically touch the tap, promoting better hygiene.

Q2. What is a solenoid valve for water?

A2. A solenoid valve is an electromagnetic device used to control the flow of water or other fluids. It consists of a coil, a plunger, and a casing. When electric current passes through the coil, it creates a magnetic field that moves the plunger, opening or closing the valve.

Q3. What are the benefits of sensor taps?

A3. Some of the advantages of sensor taps include: 1. Sensor taps reduce the spread of germs and bacteria by minimizing hand-to-surface contact. 2. They can be programmed to control water temperature and flow rate. 3. Sensor taps are convenient and beneficial for individuals with disabilities or limited mobility; they offer ease of use and require minimal effort to operate. 4. Their automatic operation is beneficial in places where frequent handwashing is essential, such as medical facilities, restaurants, and childcare centers. 5. Sensor taps are water-efficient since they automatically shut off when hands are removed, helping to conserve water and reduce utility costs.