All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(880 products available)
Ready to Ship
Ready to Ship
There are several types of solder cleaners, including:
Solder Flux Removers
As a general rule, cleaner is active and specific when it comes to residue. Most cleaners are made for flux removal and focus on this application. Cleaners for soldering and desoldering often use chemicals, such as alpha terpineol, acetone, alcohol, ethyl acetate, or other solvents, to remove the soldering paste or flux that is usually left on the surface of the target soldered electrical joints. Solder Cleaner removes solder residue to make sure the joints are safe and ready for use and to prevent corrosion and poor connection.
Steam Solder Remover
Usually, steam iron solder removers use steam to remove solder from electrical components. Solder requires hot, molten, and liquid steam for this removal. The solder sucks away from the tip using vacuum suction and puts it in a recovery chamber where it will be recycled. A steam solder sucker is widely applied in the electronic devices maintenance and repairs field where desoldering has to be performed without shock or damage to elements.
Solder Wick
As a general rule, solder soldering wicks consist of thin copper braided wires that work for solder absorption. This method involves placing a braided wick over any unwanted solder and then applying a heated soldering iron on top. The copper braid wicks have solder residue embedded in them. When it comes to this post-soldering cleaning method, solder cleaner wick is simple and handy and, as a result, widely used in electronics depot and manufacturing.
Solder Ball Remover
Solder ball is any solder mass or debris that might be left on a surface of an electronic substrate after the soldering operation. A solder ball remover is a device or substance intended to eliminate solder balls from the environment. Solder cleaning and resurgence devices mostly use suction, scraping actions, or specially formulated solvents to clean the solder balls from the surface.
Chemical Nickel Removers
Chemical nickel removers are specifically and mainly used in the electronics and metals industries in the remediation of nickel deposits through solder or other unwanted substances.
As an electrical device called AC, Solder Cleaners are applied in several industries and related to:
Consumer Electronics
In consumer electronics, solder cleaners are particularly used. Electronics depot uses various cleaners to fix and maintain items such as TVs, computers, and smartphones. Steam solder remover or solder sucker is used to desolder components in other electronic devices goods removers when cleaning solder residue after repairs.
Manufacturing
In the electronics and PCB manufacturing field, solder cleaners are mostly employed to eliminate flux and solder contaminants. Solder Cleaner machines automatically clean the surface for better connectivity and better quality control. Solder ball removers are also used during manufacturing for solder balls or solder joint voids removal.
Automotive
For repairs or installations related to electrical systems, solder cleaners are used in the auto industry. Electrical devices either have to be desoldered during auto repairs, for example, solder suckers, or have to clean solder residue to ensure vehicle electronic systems are properly functional.
Aerospace
In space application, soldering requires better cleaning to achieve performance and reliability. Alot solder cleaners and wicks are used to support the cleaning of solder joints in military systems to prevent failure of undesired electronic components in critical systems.
Industrial Equipment
In factory systems or industrial machines, electrical components either undergo solder removal through desoldering agents or are cleaned using solder cleaners to maintain the equipment's electronic systems. Solder balls discovered in these contexts are also subject to removal.
Renewable Energy
Most electrical and electronic devices in solar panels and wind turbines require solder cleaners for the maintenance and repair of electronic systems in the solar and wind system to ensure the solder joints remain efficient and effective.
Some key features come from solder cleaner specifications that vary depending on the type and application:
Solder Solder Remover Pump
General dimensions/weight: Portable gadgets; large size/weight; no bigger than 30 cm/12 inches in length, no heavier more than 500 grams. At power source manual, the electric vacuum solder sucker is powered by hand or batteries. In terms of material construction, solder solder remover pans are made of robust plastic housings, metal tips for solder absorption. Vacuum efficiency: Strong suction to eliminate molten solder quickly and effectively, usually expressed in air flow rate known as cubic feet per minute (CFM).
Solder Wicks
Dimensions: Depending on the wick braid width, solder wick wire ranges from 1 mm to 6 mm in diameter and comes in several meters long, e.g., 2 to 3 m long. Material: Oxygen copper wire with braid. Capacitance: High with great flexibility and strength. In terms of usage: The wick typically uses solder wicks for solder removal during electronic repairs.
Steam Solder Remover
Device size: Steam mechanical shifters can be huge machines or small portable units, usually around 30 cm/12 inches in length. Power source: Steam solder removers work with electric power and steam generation. Material: Steam solder removers have metal and plastic housings for the collection chamber. Additional features: Many models have extra features, such as variable suction power and quick-release collection chambers for efficiency and easy use.
Solder Flux Remover Spray
Container size: It can be bottle size or canister size but typically comes in aerosol can/ spray bottle with around 200 to 500 ml volume. Chemical components: Carbon chlorinated organic solvents, alpha-terpineol, acetone, ethyl acetate, etc., are commonly used as chemical components. Container under pressure: Contains aerosol spray under pressure with a release/nozzle actuator. Good cleaning properties include strong solvent properties to dissolve flux and solder residues.
When buying solder remover tools/solder cleaner, buyers should consider its:
Type of Solder Residue
The type of solder residue to be cleaned determines the choice of solder cleaner. For cleaning typical solder joints, a solder wick or manual solder sucker might be sufficient. For more complex tasks that involve solder balls or heavy soldering mess, something more automated or effective, for example, a vacuum cleaner for solder, should be considered.
Kind of Project
The project complexity also determines which tools to use. Simple soldering projects require just basic tools, say, solder wicks or solder lights. More grueling projects, such as complex electronic repairs or professional PCB manufacturing, need stronger cleaners with better efficiency or durability, for instance, solvent-based cleaners or steam solder removers.
Portability
For some buyers, quick availability and usage will be the first priority, especially for users who work on several small electronics projects. They should consider getting a cordless solder sucker or a pocket-sized solder wick. Those who work and perform larger projects at fixed workstations should focus more on the equipment efficiency rather than on its size, such as a solder ball remover or a steam cleaner.
Budget
This is the final consideration in most cases. Manual tools, motorized solder sucker with vacuums, and solder wick can come at a reasonable price. Steam solder remover and soldering vacuum machines can be expensive to buy. It is advisable to consider the working requirements and the expenditures within the reach before selecting the solder cleaning items.
Maintenance
In terms of electronic maintenance, one has to deal with maintenance requirements: solder wicks should be replaced; electric solder suckers should be charged or their batteries changed. Avoid cluttering or overflowing collection chambers for solder vacuums. Some machines need chemical cleaner application and other easy-removable substances such as flammable substances to clean after use.
A1: Solder remover is a tool or material applied in the desoldering process. This includes changing solder connections due to component failure or cleaning up after the production process.
A2: Remover devices create a vacuum-enabled tips for solder absorption. The machine tips melt solder and suck the molten solder into the internal chamber. This leaves the work area free of clutter and cleaned.
A3: If there is a need for the electrical system to perform optimally or problems to be prevented, then solder cleaner is necessary. Without cleaning solder residue left on joints, corrosion might occur, leading to electrical problems.
A4: Yes, some solders are desoldering tools that can be reused, such as solder wicks, putty, and vacuum pumps. Single-use desoldering braid and vacuum pumps are disposable.
