All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1087 products available)
Sharkbite fittings come in different types to cater to different pipe sizes and materials.
Couplings
A coupling is used to connect two pipes and ensure a stable connection.
Elbows
Elbow plumbing fittings enable the user to make angles of 45 or 90 degrees.
Tee Fittings
Tee fittings, commonly referred to as tees, are used to divert water flow in different directions.
Union Fittings
Unions are used when a fitting needs to be replaced. They act as an intermediate joint that connects two pipes for easy disconnection.
Adapter Fittings
These fittings are used to convert the connection from one type of pipe to another.
Cap Fittings
Cap fittings are used to shut down a certain line in a plumbing system.
Plug Fittings
Plug fittings are used to close off an opening in a plumbing system.
Cross Fittings
Cross fittings are used to allow water to flow in four directions.
Ball Valve Fittings
These fittings are used to install a shut-off valve in a plumbing system.
Residential plumbing systems
Sharkbite fittings are used in renovating old plumbing and replacing old pipes.
Commercial buildings
In commercial settings, these fittings are installed in new plumbing systems and during maintenance of the existing plumbing systems.
Industrial facilities
Sharkbite fittings are used to transfer water and other non-corrosive fluids in industrial facilities.
Healthcare facilities
Sharkbite fittings ensure the delivery of clean water for different uses, such as sanitation and hygiene.
Agricultural operations
In agriculture, these fittings are commonly applied in irrigation systems for efficient water transmission.
HVAC systems
Sharkbite fittings help in the transportation of water in heating,ventilation, and air conditioning systems.
Emergency repairs
Sharkbite fittings prove valuable when there is a need for urgent pipe repairs, such as in burst pipes.
Mobile plumbing solutions
Sharkbite fittings can be applied in temporary plumbing setups, such as mobile homes and construction trailers.
Infrastructure projects
Sharkbite fittings are frequently installed in large-scale water supply and sewage disposal systems.
Push-to-connect design
The Sharkbite system is very easy to install since it doesn't involve complicated procedures. You only need to insert the pipe into the fitting and the teeth ensure a secure connection.
Versatile material compatibility
Sharkbite fittings are compatible with various materials, such as copper, CPVC, PEX, and polyethylene.
Reusability
Sharkbite fittings are fitted with a special tool that allows them to be taken off and used again. This also makes them very useful for temporary plumbing systems.
Durability
Sharkbite fittings are made of corrosion-resistant materials, which means they will last long even in harsh water conditions.
Wide temperature range
These fittings can withstand temperatures of up to 200 °F (93 °C) for 2 hours and live in negative temperatures, such as -40 °F (-40 °C).
Variety of sizes
Sizes range from 1/2 inch to 2 inches, catering to diverse plumbing needs.
Preparation
Ensure the pipe is cut evenly and deburred to avoid damaging the fitting.
Insertion
The pipe should be pushed into the fitting till it reaches the mark set previously.
Securing
The connection is secure; additionally, the pipe can be held in place by a clamp or support.
Inspection
Regular checks should be done on the plumbing system and look for signs of leaks, corrosion, or visible damage.
Cleaning
Sharkbite fittings should be cleaned periodically to remove mineral deposits and other debris. This is done using a soft cloth or brush.
Pressure monitoring
Excessive pressure can cause fittings to fail or result in leaks. Monitor the water pressure regularly to avoid such instances.
Tightening
Aspects of fittings, such as nut and coupling, may need occasional tightening to maintain a leak-free connection.
Temperature checks
Sharkbite fittings can withstand temperatures of up to 200 °F (93 °C), but frequent exposure to extreme temperatures may damage them over time. Regularly check the temperature around the fittings to avoid deterioration.
Pipe compatibility
Ensure the pipe used is compatible with the fitting. For example, if the pipe is copper, remove the oxidation with a cloth before placing it into the fitting.
Material certification
Sharkbite fittings are made of high-quality brass and certified by ISO 9454–1:2015.
Testing and inspection
Sharkbite fittings undergo pressure and leak tests to ensure strength and durability. Non-destructive examinations, such as ultrasonic testing, are also performed to detect internal flaws.
Performance standards
These fittings meet national performance standards, such as the American Society of Sanitary Engineering Standard 112. The standard covers water distribution system materials and their health effects.
Lead-free requirements
The federal government and the EPA require that all pipes and plumbing fittings contain no more than 0.25% lead.
Installation guidelines
Proper installation is important for safety. Guidelines on installation, such as ensuring the pipe is cut evenly, should be followed to prevent leaks or failures.
Temperature and pressure limits
SharkBite fittings can safely operate a maximum pressure of 200 psi and withstand temperatures of up to 200 °F (93 °C).
Compliance with regulations
Sharkbite fittings comply with local plumbing codes and standards laid down by organizations, such as the National Sanitation Foundation and the American Society of Mechanical Engineers.
Easy installation
Since Sharkbite fittings have a push-to-connect design, they are easy to install, requiring no soldering, welding, or tools. Just insert the pipe into the fitting, and the connection is secure.
Versatile
These fittings can work with various materials, such as copper, PEX, CPVC, and polyethylene. This flexibility allows their use in different plumbing systems.
Durable and reliable
Made from high-quality, lead-free brass, Sharkbite fittings are resistant to corrosion, aging, and UV damage. Therefore, they prove long-lasting in both interior and exterior applications.
Water-saving technology
Their leak-proof design ensures no water wastage, thus conserving water while maintaining optimal water flow and pressure.
Adjustable and reusable
Sharkbite fittings can be disassembled and reused, proving very beneficial during temporary plumbing or in systems requiring frequent modifications.
Wide range of applications
These fittings are used in residential and commercial buildings for new installations, repairs, and emergency plumbing solutions.
Sharkbite fittings can last for at least 50 years, depending on water quality and system pressure.
Sharkbite fittings can be used outdoors, as they are resistant to UV rays and weather conditions.
Yes, Sharkbite fittings are manufactured using lead-free brass, as required by federal law.
Sharkbite fittings are designed to operate at a maximum pressure of 200 psi.
No, no special tools are required for installation. Just have the pipe and fitting ready—the installation is done in seconds.
