(747 products available)
A gas scooter tank is often referred to as a gas tank for holding fuel. Its main purpose is to store gas safely and provide fuel to the scooter's engine so it can run. The scooter gas tank is a crucial part of the fuel system. Without it, the scooter would not be able to run on gas. The gas tank on a scooter is usually found under the seat or on the floorboard. It is a flat metal or plastic container that holds gasoline. The gas tank has an opening on top called a filler neck. This is where the gas is poured when refueling. Gas scooter tanks come in different shapes and sizes depending on the model of the scooter. Here are some types of gas scooter tanks:
Steel tanks:
>Steel scooter gas tanks used to be the most common type. They are strong and can hold a lot of pressure. Steel tanks also rust easily if water gets inside and they are not cleaned out. Because of these problems, steel gas tanks are not used much anymore.
Plastic tanks:
>Plastic scooter gas tanks are lightweight and do not rust like steel. They also cost less to make. However, plastic tanks can break if dropped from a high place. Newer scooters have gas tanks made of a type of plastic that does not catch on fire easily.
Aluminum tanks:
>Aluminum scooter gas tanks do not rust like steel ones. Aluminum is also lightweight, so these scooter gas tanks are not heavy. Aluminum can hold up to high pressure, too. This makes aluminum tanks less likely to break from pressure than plastic ones. Aluminum gas tanks are used for high-powered scooters that need stronger containers to hold fuel.
Composite tanks:
>Composite scooter gas tanks are new technology. These tanks combine aluminum and plastic. The outer layer is aluminum to protect against high pressure. The inside layer is plastic to keep the gas from leaking. Composite tanks are very strong and lightweight.
Specifications for gas tanks on scooters are based on capacity and construction.
Capacity:
Scooter tanks have different capacities. This is because they are designed to meet the needs of various engine sizes. The capacity is often measured in liters. A 50cc scooter may have a 5-liter gas tank. 125cc models may have tanks that hold 10 liters of fuel. 150cc and larger models can have gas tanks that hold up to 15 liters. These larger tanks can give the scooter a longer range without adding too much weight.
Construction:
The material used to construct the gas tank on a 4-stroke scooter is important. Many tanks are made of plastic. This is because plastic holds up well to corrosion from contact with fuel. Tanks that are made of plastic are also lightweight. However, plastic tanks have the risk of developing cracks over time. These cracks can cause fuel leaks. Metal tanks are less likely to have leaks from corrosion or cracking. Aluminum is a popular metal used to make gas tanks. Aluminum tanks can also be made into different shapes more easily than plastic. This allows for a larger variety of tank designs.
It is important to maintain gas scooter tanks. Proper maintenance helps to ensure they last a long time. It also helps to prevent leaks, which can cause fires. Visual inspections of the gas tank should be done regularly. This is because small cracks are easier to spot on a tank with a clean surface. During inspections, users should look for any scratches, bumps, or cracks on the tank. Gas and oil should be kept away from the tank during maintenance. Both substances can damage the plastic over time.
Debris and dirt should be removed from the surface of the gas tank. This can be done by wiping it down with a soft, damp cloth. In some cases, users may need to use a mild detergent. After cleaning, users should apply a plastic protectant. This helps to prevent wear and cracking from exposure to sunlight.
It is important to follow any specific maintenance instructions from the manufacturer. The instructions may have additional tips for keeping the gas tank in good condition.
When buying a scooter gas tank, retailers should consider the following factors:
Capacity:
The capacity of the scooter gas tank is critical for long rides or commuting. A larger tank enables the user to ride for a longer time before refueling. However, the tradeoff is that the scooter may be heavier and bulkier. This affects portability and the speed of the scooter. Depending on the purpose of the scooter, users might want to prioritize a gas tank that optimally satisfies their needs.
Material:
The material of the scooter gas tank affects its durability and weight. Common materials include steel, aluminum, and plastic. Steel is strong and sturdy but can corrode when exposed to water. Aluminum is lightweight, which makes it portable, and doesn't corrode. Plastic is lightweight and resistant to corrosion, but it is not as durable as steel and aluminum.
Compatibility:
The scooter gas tank should be compatible with the model of the scooter. This includes the size of the tank and the fittings and mounting points. If the tank is not compatible with the scooter, it can lead to leaks and damage.
Price:
The price of the scooter gas tank varies depending on the material, size, and brand. It is important to compare the features and prices of different tanks before buying one. However, avoid buying gas tanks that are too cheap because they might have a short lifespan and are not durable.
Emissions:
The scooter gas tank should meet the regulations of emissions set by the government. The emissions standards limit the amount of pollution that is released into the air. Some tanks have features such as carbon canisters that absorb the emissions.
Replacing a gas scooter tank is a complex task that requires careful attention to detail and adherence to safety protocols. Before starting the process, ensure that the new gas tank is compatible with the scooter's make and model. Gather the following tools and materials:
Once everything is ready, follow the steps below:
Q1: How often should the gas tank of a scooter be cleaned?
A1: There is no specific period of time when a gas tank should be cleaned. However, it is important to inspect and clean the gas tank when users notice debris, after using a scooter off-road, or before a major engine repair.
Q2: What is the warranty period for a new scooter gas tank?
A2: The warranty period for a new scooter gas tank varies depending on the manufacturer. However, it is generally between 6 to 12 months. Some suppliers offer an extended warranty for durable and quality gas tanks.
Q3: Can a rusted scooter gas tank be repaired?
A3: Yes, a rusted scooter gas tank can be repaired. However, it is advisable to replace the tank if the rusting or damage is severe. Repairing a damaged gas tank is cost-effective but poses safety risks if the tank leaks or bursts.