All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(367 products available)
A Jeep Grand Cherokee suspension lift kit raises the vehicle's height, giving it more ground clearance and a better approach angle for off-road driving. The lift kit consists of the suspension system, which includes the coil springs and shock absorbers, and a leveling kit. The lift kit raises the vehicle's height by at least two inches, while the leveling kit raises it by one or two inches. Below are some of the types of lift kits for the Grand Cherokee.
Jeep Grand Cherokee Coil Spring Suspension Lift Kits
The coil spring lift kit replaces the stock coil springs with new coil springs. These coil springs are stiffer than the stock springs, so they compress less when the weight is applied. As a result, the vehicle's height increases. A coil spring lift kit provides better off-road performance and a smooth ride on the road. However, the lift kit may offer limited articulation, which can be a problem for extreme off-road situations.
Jeep Grand Cherokee Suspension Strut Spacer Lift Kits
This lift kit contains a spacer that is installed above the strut on the front axle. At the rear, the spacer is installed above the shock absorber. The strut spacer lift kit is cheaper and easier to install compared to other lift kits. The kit raises the vehicle's height by one to three inches. A strut spacer lift kit can improve the ride quality of heavy loads, such as towing. On the downside, the strut spacer lift kit can cause premature failure of the stock struts and shorten the lifespan of the suspension system.
Jeep Grand Cherokee Long Arm Suspension Lift Kits
The long-arm lift kit replaces the factory control arms with longer control arms. It also includes new bushings, brackets, and ball joints. The long-arm lift kit pushes the control arms further away from the vehicle. This results in better suspension articulation and improved ride quality on rough terrain. A long-arm lift kit increases the vehicle's driveability, especially in off-road conditions. On the downside, the lift kit is expensive and can increase the weight of the vehicle.
Regular Inspection
Carry out frequent inspections of the suspension system. Look for signs of wear, damage, or loosening of components like control arms, ball joints, and bushings. These parts are vulnerable to damage as a result of the lifted position of the Jeep. The earlier any problems are found, the less likely it is that more expensive repairs will be needed.
Check Wheel Alignment
After installing a lift kit, the Grand Cherokee's wheel alignment may be disturbed. In order to guarantee appropriate tire wear and handling, check the wheel alignment frequently. For correct alignment specs, consult the lift kit's manufacturer's manual.
Tire Rotation
As a result of the lifted suspension, the Grand Cherokee's tires may wear differently. To promote even wear, rotate the tires often. Follow the recommended tire rotation pattern in the owner's manual or consult a specialist.
Lubrication of Moving Parts
Ensure that all moving components of the suspension system, such as the control arms and sway bar links, receive adequate lubrication. Use high-quality lubricant to lessen friction and extend the life of these components.
Shock Absorber Inspection
Check the shock absorbers for leaks or wear regularly. Shock absorbers are crucial for controlling vehicle stability and handling; hence, maintaining their excellent condition is critical. Replace the shocks if they are worn out or leaking.
Proper Load Distribution
Observe the recommended load capacity of the lift kit and the Grand Cherokee. Ensure that any additional accessories or equipment in the vehicle are correctly distributed to avoid overstressing the suspension components.
Avoid Overextending Suspension Travel
If off-roading, be careful not to overextend the suspension's travel. Overextending can harm the suspension components and negatively influence the vehicle's stability.
Consult a Professional Mechanic
If any suspension-related issues are noticed or if there are questions about maintenance, consult a qualified mechanic or suspension specialist. They have the skills and tools required to identify and repair suspension problems correctly.
There are several factors that lift kit buyers need to consider before purchasing any model. These factors also apply to business buyers who source these kits for resale. First, consider the purpose of the lift kit. Is it for off-road purposes or on-road driving? Off-road lift kits are designed to conquer rough terrains, while on-road kits offer a slight lift for aesthetic purposes.
Jeep Grand Cherokee models differ in terms of suspension systems. When choosing a model for resale, stock the kits that correspond with the most common suspension type among target customers' vehicles. To know the suspension type, check the vehicle's manual or consult with the supplier. The lift kit should match the vehicle's suspension system to ensure compatibility.
Check the material construction of the lift kit. Heavy-duty kits are made from strong materials to withstand extreme driving conditions. Look for kits made from forged steel, steel, or 6061-T6 aluminum. Buyers should also consider the components of the lift kit. Most kits come with shock absorbers, strut extensions, and spacers. Some models come with an adjustable track bar or brake line relocation brackets. Choose kits with essential components to avoid selling incomplete sets.
Buying lift kits with manufacturer warranties protects the initial investment in case of defective products. To get a lift kit with a good warranty, shop from reputable suppliers on Alibaba.com. The suppliers offer authentic products with long after-sale services. To verify the reliability of the supplier, buyers can check reviews and ratings or get samples before placing a bulk order.
Before attempting to install a Jeep Grand Cherokee lift kit, it's important to have the right tools and materials. This includes a jack and jack stands, basic hand tools, an impact wrench, and the lift kit itself. If possible, have a second person assist with the installation. Also, read the manufacturer's instructions for the lift kit before beginning the installation.
Step 1:
Park the Jeep Grand Cherokee on a flat surface and engage the parking brake. Loosen the lug nuts on the wheels, then use a jack to lift the vehicle and secure it with jack stands. Remove the wheels.
Step 2:
Follow the manufacturer's instructions to install each component of the lift kit. This usually involves replacing or modifying the springs and shock absorbers. Use basic hand tools to remove the old shocks and springs. An impact wrench may be needed to remove stubborn bolts. Install the new shocks and springs and make sure all bolts are tightened to the manufacturer's specified torque.
Step 3:
Once the lift kit is fully installed, lower the vehicle off the jack stands. Reinstall the wheels and lower the Jeep to the ground. Torque the lug nuts to the manufacturer's specifications.
Step 4:
Take the Jeep Grand Cherokee for a test drive to ensure the lift kit is functioning properly. Make any necessary adjustments according to the manufacturer's instructions.
Q1: What is a Jeep Grand Cherokee suspension lift kit?
A1: A Jeep Grand Cherokee suspension lift kit is a modification that raises the vehicle's suspension to provide additional ground clearance. This allows for larger off-road tires, improves approach and departure angles, and enables better clearance over obstacles. The lift kit enhances the off-road capability and overall performance of the Jeep Grand Cherokee.
Q2: How long does it take to install a Jeep Grand Cherokee suspension lift kit?
A2: The installation time for a Jeep Grand Cherokee suspension lift kit can vary depending on the kit's complexity and the mechanic's expertise. Generally, the installation process can take anywhere from 4 to 8 hours. Following the manufacturer's instructions and, if necessary, seeking professional installation for more complex lift kits is essential.
Q3: What are the benefits of installing a suspension lift kit on a Jeep Grand Cherokee?
A3: Installing a suspension lift kit on a Jeep Grand Cherokee offers several advantages. The most important thing is improved off-road performance, allowing the vehicle to navigate rough terrain and obstacles more easily. The lift kit also provides additional ground clearance, enabling the use of larger tires, which improves traction. Furthermore, the elevated stance improves approach and departure angles, making it easier to tackle steep inclines and obstacles.
Q4: Are suspension lift kits available for all Jeep Grand Cherokee models?
A4: Yes, suspension lift kits are available for most Jeep Grand Cherokee models. However, the kit's specifications and compatibility may vary depending on the model year and variant. It is important to choose a lift kit specifically designed for the particular Grand Cherokee model to ensure proper fitment and performance.
Q5: Can I install a suspension lift kit on my Jeep Grand Cherokee myself?
A5: While it is possible to install a suspension lift kit on a Jeep Grand Cherokee, having the necessary mechanical skills and knowledge is essential. The installation involves working with the vehicle's suspension components, which can be complex and, if not done correctly, can affect safety and performance. If there is uncertainty about the installation process, it is recommended to seek professional help from a qualified mechanic or off-road specialist.
