All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(21 products available)
The types of furnaces are differentiated by the range of heating seasons they can provide.
This is a gas furnace and air conditioner combination unit that has both functions. It comes with a heater and cooler. Air conditioning is done by the system through the use of refrigerant that is run through coils in the Goodman gas furnace. Heat is generated by the furnace from burning gases, which then circulate that air through ducts under pressure. This unit is designed for homes with a duct system for heat and cooling, where outdoor temperatures are moderate. Fuel is burned by the Goodman heater and air conditioner to produce a combination of heat and cool, which is then delivered into the space.
This is a complete packaged heating and cooling unit that provides both heat and cool. It contains a Goodman gas furnace and Goodman air conditioning system. The Goodman furnace heater and ac work together in this unit to first cool the air down with refrigerant and then heat it up through combustion. This unit suits homes that need both heating and cooling, where temperatures vary both in winter and summer.
This is a Goodman gas furnace, replacement ac system. It does not use gas to heat the air but rather electric coil heat. This gas pack is fitted with a Goodman electric heating system.
Goodman gas furnaces are applied in various industries. Here are some of them:
Gas furnaces are extensively used in the ceramics industry to achieve the high temperatures required for firing clay, glazes, and ceramic products. They ensure efficient and controlled heating, resulting in high-quality finished goods. In the ceramics industry, gas furnaces provide precise temperature control for firing, essential for durable and high-quality ceramic tiles and wares.
Temperature control in glass production is important for achieving desired viscosity. Goodman gas furnaces provide precise and consistent heating necessary for shaping, forming, and annealing processes in the glass manufacturing industry.
Goodman gas furnaces are used to smelt ores, refine metals, and produce alloys by providing high temperatures to melt and mix metal.
The chemical industry relies on Goodman gas furnaces for the synthesis of chemicals. Gas furnaces provide the high temperatures and controlled environments required for chemical reactions and facilitate the production of essential materials like catalysts.
Gas furnaces heat treat components such as gears and shafts. Many industries use them to temper, harden, or normalize parts to improve physical properties.
In jewelry manufacturing, Goodman gas furnaces are used to cast precious metals. They provide the precise heat needed for alloying and ensure intricate designs are achieved without compromising metal properties.
The aerospace industry uses Goodman gas furnaces to produce high-performance alloys and aeronautical components. The precise temperature control during the heating process ensures the creation of materials with superior strength, lightweight properties, and enhanced resistance to extreme conditions. These furnaces are vital for advanced materials essential in the production of aircraft, engines, and other aerospace systems.
Catalysts are used in many industrial processes to accelerate chemical reactions. Gas furnaces are responsible for producing and activating these catalysts in the chemical industry.
Goodman gas furnaces play an important role in the brick manufacturing industry. These furnaces provide the controlled environment necessary for firing bricks, ensuring they reach the required hardness and durability. By maintaining precise temperatures, gas furnaces enable the even heating of clay bricks, resulting in a strong, resilient final product used widely in construction.
These are some features and specifications of the Goodman gas furnace:
Heating Capacity
The heating capacity of Goodman gas furnaces ranges from 50,000 BTU to 100,000 BTU. This makes them suitable for both small and large industrial applications.
Efficiency Ratings
Most Goodman gas furnaces have annual fuel utilization efficiency ratings of about 80% to over 95%. This means that most of the fuel they consume is converted into usable heat.
Safety Features
Goodman gas furnaces include important safety features such as automatic shut-off valves, ignitor protection, and high limits to prevent overheating.
Materials
Goodman gas furnaces are constructed using durable materials like steel cabinet and aluminized steel heat exchangers. This helps ensure longevity and corrosion resistance.
Size
Available sizes of Goodman gas furnaces range from 80,000 to 100,000 cubic feet per minute.
Step 1
Turn off the gas and electricity. Remove the old furnace. Measure the size of the Goodman gas furnace and furnace cabinet. Measure the height and width of the Goodman gas furnace and the furnace cabinet and ensure it fits the designated area.
Step 2
Install the Goodman gas furnace by putting the furnace in the designated area. Connect the gas line to the furnace. Secure the furnace to the ductwork by sealing all the seams with foil tape. Use screws to attach the furnace to the ducts.
Step 3
Once done, turn the thermostat to the off position. Turn on the gas and electricity. Ensure all open gas lines are closed.
Step 4
Check on the installation of the Goodman gas furnace. Set the thermostat one degree lower than the refer temperature. Set the furnace switch to heat and adjust the thermostat fan to on.
Place the Goodman gas furnace at an appropriate spot in the room. Switch the thermostat to 'heat' position. Adjust the temperature to the desirable level using the thermostat dial. Monitor the furnace regularly for efficient operation.
Maintenance
Goodman gas furnace maintenance involves routine checkups by qualified technicians, who identify and fix issues, clean critical components, and ensure all parts work well. Maintenance is done by replacing air filters regularly, cleaning or switching off the furnace, adjusting blower components, and checking burners to ensure efficient operations. Recommended maintenance is done yearly, before winter onset, to prevent breakdowns during heavy use.
Repair
People need to avoid amateur repairs with Goodman gas furnaces, as this can lead to safety hazards, additional damage, and voiding of warranties. Goodman gas furnace repairs are best left to qualified professionals. Common repairs include faulty thermostats, ignition issues, or worn-out blower components.
Some quality and safety measures that should be considered include:
The furnace quality and safety are important for the performance and efficiency of Goodman gas furnaces. In addition, it helps prevent accidents, ensure reliable operation, and reduce environmental impact.
Goodman gas furnaces adhere to safety standards, which include automatic shut-off valves to prevent gas leaks and high-limit sensors that automatically turn off the furnace when it gets too hot.
Many models include an emergency shut-off feature that turns off the furnace in case of ignition failure, gas leaks, or extreme heat. These help in preventing accidents and allowing users to diagnose problems.
Routine maintenance involves checking for gas leaks, inspecting heat exchangers, and ensuring all safety components function. Goodman furnaces have easy access to internal components, making it easy to conduct maintenance.
Goodman gas furnaces are fitted with insulated cabinets and high-quality motor components, which help reduce operational noise.
Goodman gas furnaces are certified by nationally recognized testing organizations (
A1. Goodman gas furnaces provide reliable and efficient heating for residential and industrial applications. They help maintain comfort during cold weather in either space.
A2. Yes, Goodman gas furnaces are safe and reliable. They have several shut-off features to prevent overheating, gas leaks, and other possible dangers. They are fitted with durable ignition controls and quality components that ensure they work well for years.
A3. Yes. Goodman gas furnaces incorporate variable-speed blowers, multi-stage heating, and private fuel utilization efficiency to optimize energy use and reduce wastage. This helps minimize utility bills while providing effective heating.
A4. Maintenance done on a Goodman gas furnace includes changing or cleaning air filters, cleaning blower components, checking and cleaning burners, and having a professional technician do routine checks for possible repair needs.
A5. The way Goodman gas furnaces are built, they are fitted with long-lasting materials like stainless and aluminized steel.
