All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(106 products available)
Ready to Ship
Ready to Ship
Gas struts for the barber chair are critical elements which help with the adjustment and support of the chair during the use. Those parts could help provide comfort and also aid in relatively smooth motion by minimizing the shocks. Below are the most common types of gas struts for barber chairs.
The chromed and unchromed strut differs in the material of the outer cylinder. The chrome struts have a layer of chrome on the cylinder base to prevent rust, while the unchromed struts are made of non-chrome metal and are often cheaper.
Also known as a force-adaptive strut, the automatic gas chair strut changes pressure depending on the weight applied to the chair. A manual gas chair strut requires manual adjustment to change height or any other settings.
A dual gas strut system consists of two gas struts, whereas a single system has one. The dual strut systems support greater weights and allow smoother height adjustments, while the single strut systems cost less and are relatively easy to install.
A heating and cooling gas strut is designed with a special inner mechanism to withstand extreme temperature changes. These struts have special internal accessories that can easily withstand change in temperature and will not easily fail. A heating and cooling gas strut for barber chairs is particularly useful for salons in regions of extreme temperature or those with very high heat.
The details regarding the materials and construction of a gas strut, as well as the effect this has on its lifetime, are discussed here.
Hydraulic Oil and Gas Mixture
Most barber chair gas struts contain a mixture of hydraulic oil and gas within the hermetically sealed cylinder. This creates a balance between pressure and forces within the strut, allowing smooth operation. In older models, the combination used to become thick with time because of dirt, but then durability reduced. Current models have strut oils that do not easily thicken, which allows the gas struts to last longer.
High-Quality Seals
The cylinder seal used for the gas struts in barber chairs is usually made of polyurethane or another polymeric material. Those seals are efficient at keeping gas and liquid inside the cylinder, but they also resist wear due to friction and extreme temperature conditions. The high-quality seal minimizes leakage, which leads to reduced strut wear and tear, thus resulting in a longer lifespan.
Piston Rod Material
The piston rod, which is the rod moving in and out of the cylinder, is mostly made of rigid steel. Some high-end struts come with a layer of chrome plating or other corrosion-resistant coatings to increase durability further. This material is particularly important for chairs with heavy usage as it affects the smoothness of the strut's function.
Cylinder Construction
Gas chair strut cylinders are often constructed of steel or aluminum alloy to ensure structural integrity. Aluminum is light but does not resist wear as steel does. Because of this, stainless steel will often be used for the barrel of the highest-quality struts, as it will not rust and will not be easily corroded by the chemicals present in the salon.
Useful applications and commercial values of gas struts for barber chairs are given below.
Barber chair
The primary purpose of gas struts for barber chairs is to provide a very smooth and easy adjustment of the height of the chair as well as the recline angle. They allow the barber or technician to adjust the chair for different clients easily, which is critical in providing comfort and quality service to clients.
Salon furniture
Gas struts are fitted in salon chairs and are therefore instrumental in enhancing their commercial value. As the struts used improve functionality and comfort, this makes the chairs more appealing to both customers and retailers.
Spas
The Barber chair gas spring is not only for barbershops or salons, as they are also used a lot in spa chairs. They will support the different weights that will be experienced on the chair while also allowing the different positions that are good for the different treatments.
Hydrotherapy Solutions
Gas struts are used for reclining and lifting components in chairs involved in hydrotherapy systems. They withstand both water and pressure, making them a great component for any hydrotherapy chair.
Massage Chairs
Gas struts allow parts of the massage chair to move and give different positions. This makes the gas struts critical to the operation of many types of massage chairs by providing all the motions required for the massages and the comfort.
Some factors that a buyer should examine when selecting barber chair gas struts are explained further. Below are the important considerations buyers should keep in mind.
Force Rating
The force rating of gas chair struts for a barber chair must be proportional to the average weight that the chair supports. If the strut of the chair has a lower rating than this weight, it will collapse, while a higher rating will cause over stiff motions. Proper choice ensures that clients enjoy a smooth and easy adjustment.
Compatibility
Buyers should ensure that the struts are ordered to fit the existing propane powered lift chair. Certain chairs only need specific gas struts in terms of length, mounting brackets, and diameter, so it is important to confirm this. Measuring the current strut is usually required to keep the new one from replacing the old one.
Ease of Installation
Barber gas chair struts also come with easily mountable components and dismountable parts. Some struts have simple hook ends, while others demand specific mounting brackets. Easy-to-install struts allow quick replacements, reducing downtime for the clients and the business as well.
Durability
Buyers should consider the lifetime of the struts offered based on the materials and the conditions in which they were made. Struts with corrosion and wear-resistant coatings will serve well in the high-moisture environments often found in salons and spas. It ensures that durable struts are not frequently replaced.
Brand Reputation
It is important for the buyers to consider the brands they are purchasing from, as the performance and reliability of gas struts will only be guaranteed by certain reputable brands. Struts from trusted manufacturers are often put through rigorous tests and peer reviews to determine their effectiveness. Choosing reputable brand stock gas struts for barber chairs ensures quality and performance.
Gas struts for chairman are worth it since they offer smooth adjustments. Also, the comfort level is increased, resulting in increased satisfaction for clients. They are simple to install and easy to replace if required, making them quite easy to handle.
Using a larger gas strut than necessary for a chair is not advisable. An overstretched strut may cause damage to the frame or the hydraulic system, and vice versa; a smaller strut would fail to provide the required balance of support and motion. The strut should be of the right size for this specific chair.
Proper gas struts last between 5 to 7 years. Their lifetime largely depends on external factors such as the degree of usage, the environmental conditions of the salon or the spa, and the quality of the struts involved. High-quality gas struts for barber chairs will last longer than ordinary ones.
Gas strut failure will cause the chair to not adjust properly, which may even cause it to become dangerous if the chair collapses. Also, the motion of the chair may become jerky or hard, leading to discomfort for clients because of those two reasons. One has to replace faulty struts to restore the chair's functionality.
