All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(4280 products available)
Ready to Ship
For buyers who wish to do a wholesale of gas pump hoses at a profit, knowing the different types of gas pump hoses is important. The following are the types:
Submersible gas pump hose
This hose is designed to be placed inside a tank. It allows gasoline to be transferred out of the tank, hence submersible. They are built with special materials that prevent dissolving or any other negative effect, especially where water and some chemicals are found. They are made to be very durable to withstand the constant pressure of complex liquids.
Ventilation gas pump hose
Ventilation gas pump hoses are used to allow air into fuel tanks, preventing a vacuum that can inhibit fuel flow. These hoses are usually thinner than fuel delivery hoses and are made from flexible materials that can withstand minor pressures. Ventilation gas pump hoses are often braided to enhance strength and can be found in various lengths to fit different tanking needs.
Vapor recovery gas pump hose
Vapor recovery gas pump hose is used to recover vapors displaced by liquid fuel during the fueling process. These vapors, if not contained, can be harmful to the environment and health. Vapor recovery hoses incorporate specialized inner linings that can withstand chemical degradation and usually possess enhanced sealing capabilities. Enhanced sealing capability ensures effective vapor transfer without leaks.
Diesel gas pump hose
A diesel fuel transfer pump hose is specifically designed for transferring diesel fuel. They are often constructed from materials that resist oil and chemical degradation. Diesel pump hoses tend to be more robust.
Hydraulic gas pump hoses
These are flexible conduits, which help to carry hydraulic fluids from one point to another so the relevant work can be completed. The work cannot be completed without hydraulic gas pump hoses, as they are needed by hydraulic systems. These hoses are made with quality reinforcement to resist bending and cracking.
To increase profitability, buyers also need to know the industrial applications of gas pump hoses. They include the following:
Automotive fueling systems
Gas pump hoses remain important to automotive fueling systems as they transfer fuels from storage tanks to vehicles. Their flexible nature allows for easy handling, and their strength ensures they withstand high-pressure fuel delivery.
Petroleum transportation
Gas pump hoses are utilized in the transportation of petroleum products. They are employed in marine and land-based systems for the transfer of oil, gasoline, and other petroleum derivatives between vessels and storage facilities. Gas pump hoses for petroleum transportation are usually longer, more robust, and constructed from materials resistant to a wide range of petroleum-based chemical.
Fuel dispensers in filling stations
Gas pump hoses are critical components of fuel dispensers at filling stations. They directly deliver fuel to vehicles. These hoses are constructed from durable, flexible materials. Their durability is an added advantage because they have to withstand constant exposure to gasoline and diesel fuel, as well as vehicle wear and tear.
Heavy machinery operation
In agricultural, construction, and mining industries, gas pump hoses are used to power up and operate heavy machinery. People who construct the hoses subject their materials to high-pressure hydraulic fluids to make them work efficiently and last long, even under very demanding conditions.
Emergency services
Gas pump hoses are used in emergency operations like firefighting. In firefighting applications, gas pump hoses are designed to pump water to help put out the fire. The hoses are made strong enough to resist kinking as water is transmitted under pressure through them. Also, their flexibility allows for easy coiling and storage.
Vapor recovery systems
Vapor recovery systems use gas pump hoses to recapture harmful fuel vapors during fueling operations. This prevents releasing toxic emissions into the atmosphere. The hoses in these systems are equipped with specialized nozzles and fittings. These fittings effectively capture and transport vapors back into storage tanks.
Technical specifications
The common inner diameter is 3/4 to 1 inch. The common length is about 12 feet. The common material is rubber, but reinforced PVC and stainless steel could also be used. Reinforcement is usually steel wire braid.
Key features
Resistance to chemicals. Flexibility. Strength and durability. Anti-static properties. Compatibility with vapor recovery systems. Enhanced safety features.
Inspect the old hose and the complete fuel system before installing the new gas pump hose. It is recommended to do this if the buyer is replacing an old hose. You should look for cracks and other wear and tear signs in the old hose. Also, inspect the hardware and other fittings while checking the old hose. The equipment's inner diameter should match the new hose. After this, gather all the necessary tools needed for the installation. The required tools are usually screwdrivers, hose clamps, and wrenches, among other common tools.
Buyers should remove the old hose from the hardware after getting ready for the installation. Use a pair of hose clamps to loosen it. After loosening the clamps, pull the old hose out. Some situations may warrant the use of a hose removal tool if the hose is stubborn.
As buyers install the new gas pump hose, it is advised to keep the new hose nearby. They should move to the hardware and connect one end of the new hose. While doing this, ensure that the hose fits properly over the hardware. After connecting, secure the connection using a hose clamp. Repeat the same process for the other end of the hose.
The last part of the installation is a mid-fuel system check. This is done to ensure that the hose is connected properly. Buyers are advised to recheck the connection between the hose and each hardware to confirm if the installation was done correctly. Also, conduct a low-fuel pressure check to examine if there are any leaks.
Users should store the gas pump hose in a clean and dry environment free of hot substances and sharp items. This place should be the first-coil storage space. Users should examine the hose for signs of wear, like cracks, before using it. They should replace any worn-out hoses before using them. Put the nozzle of the gas pump hose into the fuel tank opening of the vehicle or equipment, ensuring a good fit. Set the nozzle to the open position and engage any locking mechanism, if available, to prevent constant pressure on the trigger. Adjust the nozzle to the desired fuel flow rate. This might be low flow for delicate tasks or high flow for larger fuel tanks.
Once everything is set, users should pull the nozzle trigger to begin fuel dispensing. Allow the fuel to flow until the automatic shut-off feature engages. This feature stops the fuel flow when the tank is full. If the automatic shut-off feature does not engage, users must pay close attention to avoid overfilling.
When dispensing is complete, users should remove the nozzle from the fuel tank. Before removing the nozzle, users should ensure no further fuel is dripping from it. It is advised that users should clean the gas pump hose after each use to maintain it. Inspect the hose for any signs of damage or fuel residue. If present, wash the residue with soapy water.
Users should check the gas pump hose regularly for visible signs of wear and tear. Look for cracks, fraying, or bulging, as these indicate that the hose needs to be replaced. It is also advised that users should inspect any fittings or connectors.
A user should clean a gas pump hose immediately after using it, especially if hazardous or toxic materials have been passed through the hose. Failure to do so may result in damage and reduced life of the hose. Wash the user-friendly way using soapy water. They should store the hose properly in a cool, dry, and shaded place. It should be away from direct sunlight and extreme temperatures.
For quality considerations, buyers should always pay attention to the material composition of the gas pump hose. Materials like oil, weather, and ozone-resistant nitrile-butadiene rubber will make the hose last longer. A gas pump hose with wire mesh or PVC structural support will provide better durability and strength. This is because reinforcement improves the hose's capability to handle fluid pressure and prevent kink or collapse.
It's important that the gas pump hose's inner diameter is compatible with the intended application. This ensures optimal fuel flow and efficiency. To promote quality, buyers should look for manufacturers that put quality control processes in place during production. Such manufacturers gather gas pump hose samples randomly and test them for defects and functionality. Also, consider any certifications that ensure the hose meets industry standards for safety and performance, like the DOE and EPA certification.
Proper installation
Users should ensure the gas pump hose is properly installed. The right fitting avoids leaks, which will be bad for safety and quality. Also, improper installation could cause hose damage. They are advised to follow the manufacturer's installation guidelines for direction.
Regular inspection
Users should inspect the gas pump hose regularly for wear and tear. A damaged or worn hose is a safety hazard. It can burst and lead to dangerous situations.
Static electricity
Most gasoline and other petroleum products are very flammable. So, to prevent a potential fire, users should ground the gas pump hose when working in dry environments. Also, ensure the hose has an anti-static feature. The feature helps to dissipate any static electrical charge that may accumulate.
Proper storage
Users should store a gas pump hose away from direct sunlight, extreme heat, and sharp objects. Reasonable storage will help prevent premature deterioration and reduce the risk of accidents caused by a damaged hose.
Emergency readiness
A gas pump hose should be examined regularly for integrity, just like firefighting equipment. Any malfunctioning part should be replaced to avoid compromising the whole system. In addition, it's crucial to have a safety plan involving local emergency responders if a fuel spill is experienced.
A1. The way to clean a gas pump hose is to wash it with soapy water. This routine washing should be done immediately after using the hose to prevent corrosion of the internal lining.
A2. Worn-out hoses, bad mechanical conditions, and natural aging affect hoses. Other factors include prolonged exposure to chemicals and extreme weather. It is wise to inspect wear and tear signs constantly.
A3. Yes, a gas pump hose is flexible enough to navigate around obstacles. That is why they are commonly used in hydraulic systems to easily maneuver and bend without kinking.
A4. Yes, a gas pump hose is constructed with chem-resistant material. It's been tested for chemicals, heat, and pressure resistance to improve performance and safety when transferring fuel or fluids.
A5. When transporting gas pump hoses, consider the ambient weather and condition they will be kept in during transport. Ensure enough padding is added to prevent the hoses from getting damaged.
