All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1064 products available)
This twelve K watt three-phase hybrid inverter is capable of being connected to the grid or else used in a stand-alone manner.
It improves energy self-consistency by augmenting the use of renewable energy. This helps in decreasing dependence on fossil fuels.
When production, the grid can accept excess energy from solar panels. This energy bite improves the electric system's overall reliability and efficiency.
As a result, when utilized in an off-grid system, a DEYE hybrid inverter can charge batteries from various sources such as a generator, a grid, or a renewable energy resource.
It allows consumers to continue to have energy even when there are outages. By integrating DEYE hybrid inverters with batteries, off-grid consumers are capable of providing a continuous electric supply for their properties.
This DEYE 12kw 3 phase hybrid inverter can be utilized in three-phase electrical systems not like a single-phase hybrid.
This is particularly helpful for industrial and commercial entities with three-phase electrical systems. They need consistent and reliable electricity.
Three-phase hybrid inverters are capable of providing strong performance because they smooth out electric supply. This reduces distortion. It enhances the overall effectiveness of the electric system.
This DEYE hybrid inverter can be easily mounted on skids to facilitate installation and transportability.
This configuration can run either in isolated or interlocked positions concerning the power grid.
It allows flexibility in its placements. For instance, being on-site for temporary construction power or permanently located for power generation.
hybrid solar inverters are important energy cost-saving tools for industrial and commercial applications.
By combining DEYE inverter with solar power generation, these businesses can largely reduce their electricity bills.
During the day, when power consumption peaks, the DEYE inverter utilizes solar power to meet the demand. Consequently, the grid spends less energy.
Many companies, especially manufacturing facilities, have huge energy requirements. Thus, they benefit much from using DEYE hybrid inverters. It ensures a steady electricity supply is maintained.
These systems work conventionally by storing surplus energy from the DEYE grid or else a renewable power resource in batteries for future use.
This helps energy movement throughout the day. It makes the system more efficient and flexible.
When electricity costs are elevated, stored energy is capable of being utilized to decrease dependence on the grid. This is particularly with peak hours. These systems can give significant benefits to both residential and commercial users when installed.
As they can charge batteries using excess grid power or renewable energy while also powering EVs. It allows users to take advantage of their DEYE hybrid inverters by charging their electric vehicles with cheaper energy.
This makes using electric vehicles more feasible. It also promotes the consumption of green transport options.
These places are required to constantly have a reliable electricity supply as they operate technical systems and keep information storage.
They are also expensive to run because of the amount of electricity they use. Data centers prevent outages and offer continuous power through hybrid inverters.
They also provide energy cost savings. Operating without constant power interruptions is paramount for data centers.
Hybrid inverters can automatically switch to battery power or other backup sources of energy in case of a power outage. This keeps data centers operational even during grid failures.
These depend heavily on constant power availability to keep their networks operating.
Just like in data centers, power outages can significantly impact communication services and cause financial losses. DEYE hybrid inverters can provide backup power during outages.
This ensures that telecommunication services are not interrupted. Also, they can be linked to unrestricted energy sources. This decreases operational costs because power is obtained from a low-cost resource.
Maximum PV power input
The solar hybrid inverter can manage a maximum solar power input of up to 13000 watts. This gives it the ability to effectively utilize power from bigger solar panels.
MPPT number
The inverter has three MPPTs. This ensures better solar energy harvesting from partially shaded or else differently oriented modules.
AC voltage
It has an AC voltage of 400 plus or minus 10 percent volts. 50/60 Hz.
Max AC output current
The maximum allowed alternating current output is 18O amperes. This ensures the inverter can sustain higher power output.
Communication interface
The DEYE app communication interface is supported through RS485 and Wi-Fi. This enables simple monitoring and configuration of the equipment.
Battery voltage range
The battery voltage range is set between 336 to 440 volts. This makes the DEYE inverter compatible with wide battery varieties.
Turn on the DC switch on the solar side.
Begin by flipping the DC switch located on the solar side of the inverter.
Press the ON button
Next, after turning on the DC switch, press the ON button found on the DEYE inverter's front panel to begin the system's operation.
AC out and outlet
Following that, connect appliances to the DEYE inverter using output ports while power is permitted through the AC outlets.
Turn on main switch
Last but not least, flip the main switch found on the DEYE hybrid inverter to the ON position. This will activate the hybrid system and allow power.
Regularly observe and ensure all connections are safe, especially the DC and AC wiring sections.
Loose connections can cause power losses or else system failures. Thus, tighten all the necessary connections at least once every month.
Inspect the DEYE hybrid inverter's cooling fan at least once every month for debris accumulation.
Obstructed fans can result in overheating and performance drop. Clean the fan diagrams and blades regularly to ensure proper airflow.
Check for error messages on the DEYE app frequently.
The software will usually notify users of any problems that require attention.
Hybrid inverters are protected from overloads. However, it is still necessary to keep tabs on energy output.
Exceeding the required output can damage the device over time. Monitor the output and make necessary adjustments whenever power needs are met.
The DEYE hybrid inverter should be inspected for excessive DC output voltage first thing in the morning. This can be done using a multimeter. Check the voltage at the battery output terminals.
Any voltage above 60 volts can be dangerous because it may cause severe electric shocks. If the current output voltage is above this threshold, do not directly touch the cables or terminals.
Remove the DEYE inverter's DC circuit breakers from the battery side. Wait for at least five to ten minutes. This time allows the voltage to drop to a safer level before handling the cables.
Once the breakers are switched off and the cables are at safe voltage levels, then it's safe to work on the system.
The alternating current output voltage must also be checked for excessive AC voltage.
Using a multimeter, test the output voltage at the DEYE inverter's AC output terminals. Any voltage above 250 volts can be hazardous.
It may cause severe electric shocks. If the output voltage is above this threshold, take the below-specified precautions.
Turn off the DEYE inverter's main switch.
Locate the main switch on the DEYE hybrid inverter. Switch it off to prevent further power transmission.
Unplug all connected appliances.
Go through all DEYE inverter's plugged appliances and thoughtfully disconnect them.
Hybrid inverters should be examined for safety by consulting relevant standards such as the International Electrotechnical Commission IEC 62109.
The DEYE inverter can be inspected for compliance with these safety standards by looking at its design and specifications.
Look for safety features such as overcurrent protection, short circuit protection, and also the DEYE inverter's isolation mechanisms.
Ensure they correspond to the requirements of the above-mentioned safety standards. Noncompliance with safety regulations may lead to hazardous situations such as fires, electric shocks, and even equipment damage.
If an inverter fails to comply with required safety standards, it should be replaced immediately.
Inverters that do not meet safety standards have inadequate safety features. This puts them at risk for accidents like electric shock, fires, and equipment damage.
The risk of these inverters is extremely great, especially in an environment where numerous electrical devices run simultaneously.
In such a condition, it is important to look for a DEYE inverter that meets diverse safety standards.
A1: A hybrid inverter combines functions of grid-tied and off-grid inverters. A DEYE hybrid inverter can operate on and off the power grid while also storing electricity for later use.
A2: A three-phase hybrid inverter works by converting direct current (DC) into alternating current (AC). Then, it simultaneously manages energy flows between the grid, battery storage, and electric appliances.
It does all this while operating on a three-phase electrical system. This helps provide a balanced and consistent power supply.
A3: The main benefits of DEYE hybrid inverters are energy independence, cost savings, and reliability. Also, they provide seamless power backup during outages. They allow for the integration of electric vehicles and other advanced energy management features.
A4: The function of a three-phase inverter is to convert direct current (DC) into alternating current (AC). It does this by generating three-phase AC electricity from a DC source, such as solar panels or a battery.
A5: During the day, when electricity rates are typically highest, the DEYE hybrid inverter uses excess solar power to meet a home's energy needs.
It reduces the need to purchase power from the grid. When utility rates are high, it can also store excess energy for later use.
A6: Homeowners should consult a qualified energy professional when choosing a DEYE inverter. Inverters must be matched with energy requirements and system components.
Experts assess the home's electrical system, energy consumption, and solar panel array to recommend the right inverter.
