All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(1089 products available)
Ready to Ship
Ready to ShipEverything you need to know about types, specifications, selection criteria, installation, and maintenance
7x6 LED headlights are rectangular 7-inch by 6-inch headlights designed to replace traditional halogen bulbs. Also known as 7x6 LED conversion headlights, they offer improved visibility, energy efficiency, and longer lifespan compared to standard halogen options. These versatile headlights come in several different styles to accommodate various driving needs and vehicle specifications.
Dual-beam 7x6 LED headlights integrate both high and low beams into a single unit, making them ideal for vehicles with one headlight per side. The low beam provides visibility up to 500 feet ahead, perfect for night driving on dark roads, while the high beam extends illumination up to 1000 feet for improved visibility on well-lit roads.
Best for: Vehicles with single headlight housing per side, drivers needing versatile lighting options
Single-beam 7x6 LED headlights feature either a high or low beam function in one unit, simplifying wiring and installation. These are perfect for vehicles with multiple headlight housings per side, allowing for dedicated high and low beam units.
Best for: Vehicles with multiple headlight housings, simplified wiring setups
Using a parabolic reflector design, these headlights distribute light from LED bulbs effectively onto the road, enhancing visibility while maintaining affordability. The reflector technology efficiently amplifies and directs the light output.
Best for: Budget-conscious drivers seeking improved visibility and performance
Equipped with a specialized projector lens, these headlights focus LED light into a concentrated beam pattern, providing superior road illumination with precise cutoff lines that reduce glare for oncoming traffic.
Best for: Maximum nighttime visibility, reducing glare for other drivers
Halo LED headlights feature distinctive rings of LED lights surrounding the main beam, creating a signature look that enhances vehicle aesthetics while providing functional illumination. The halo rings can often be customized with different colors.
Best for: Style-conscious drivers looking to customize their vehicle's appearance
Expert Tip: When upgrading from halogen to LED headlights, consider whether your vehicle requires an anti-flicker harness or load resistor to prevent electrical issues with the new LED setup.
| Headlight Type | Key Features | Best Application | Light Pattern |
|---|---|---|---|
| Dual-Beam | Both high/low beams in one unit | Vehicles with single headlight per side | Versatile with two lighting patterns |
| Single-Beam | Dedicated high or low beam | Vehicles with multiple headlights per side | Focused on specific function |
| Reflector | Parabolic reflector design | Budget-conscious upgrades | Wide light dispersion |
| Projector | Focused beam pattern with lens | Maximum visibility needs | Concentrated with defined cutoff |
| Halo | Decorative LED ring around beam | Style-focused applications | Functional plus aesthetic lighting |
Focused illumination with defined cutoff to prevent blinding oncoming traffic
Maximum illumination for optimal visibility at distance and on dark roads
Low, wide pattern designed to penetrate fog, rain, and adverse conditions
Maintenance Tip: While LED headlights require minimal maintenance compared to halogen bulbs, regular cleaning and inspection can significantly extend their performance and lifespan.
| Maintenance Task | Frequency | Purpose |
|---|---|---|
| Exterior Cleaning | Monthly or as needed | Remove dirt and debris that can reduce light output |
| Connection Inspection | Every 6 months | Check for corrosion or loose connections |
| Alignment Check | Annually or after bumps/impacts | Ensure proper beam aim for optimal visibility |
| Moisture Inspection | After heavy rain or washing | Check for any water ingress that could damage electronics |
| Full System Test | Seasonally (especially before winter) | Verify all lighting functions work properly |
Selecting the optimal 7x6 LED headlights for your vehicle requires careful consideration of multiple factors to ensure compatibility, performance, and compliance with regulations. Follow this comprehensive guide to make an informed decision:
Important: Some jurisdictions have specific requirements for headlight modifications. Always verify that your chosen LED headlights comply with local regulations to avoid potential fines or failed vehicle inspections.
| Feature | Benefit | Ideal For |
|---|---|---|
| Anti-Flicker Technology | Prevents flickering issues common when upgrading to LEDs | Vehicles with sensitive electrical systems |
| Built-in DRL | Daytime Running Light functionality for increased visibility | Drivers seeking enhanced daytime safety |
| Adjustable Mounting | Fine-tune headlight aim for optimal road illumination | Vehicles with limited factory adjustment options |
| Plug-and-Play Design | Simple installation without complex wiring modifications | DIY installers without extensive electrical experience |
| Customizable Appearance | Change halo colors or accent lighting for personalization | Style-conscious vehicle owners |
Replacing your vehicle's headlights with 7x6 LED units is a straightforward DIY project that most vehicle owners can complete in under an hour with basic tools. Follow this comprehensive step-by-step guide for a successful installation:
Park on level ground, turn off the engine, engage the parking brake, and disconnect the negative battery terminal to prevent electrical shorts. Allow the engine to cool if you've been driving.
You'll need: Phillips or flathead screwdriver, socket wrench set, the new 7x6 LED headlights, dielectric grease (optional but recommended), and zip ties for securing wires.
Open the hood and secure it properly. Locate the headlight assembly and identify the mounting screws or clips holding it in place. These are typically around the perimeter of the headlight.
Carefully remove the mounting screws or unclip the retaining clips. Gently pull the headlight assembly forward to access the rear connection. Disconnect the electrical connector by depressing the tab and pulling—never pull on the wires themselves.
Remove the new 7x6 LED headlight from its packaging and inspect for any damage. If provided, apply a small amount of dielectric grease to the electrical connector to prevent corrosion and ensure a good connection.
Connect the wiring harness to the vehicle's connector—it should click firmly into place. Position the new LED headlight in the housing, aligning the mounting holes. Secure with the original screws or clips, being careful not to overtighten.
Before finalizing everything, reconnect the battery and test all headlight functions: low beam, high beam, and turn signals if applicable. Check that both headlights are working properly and aligned similarly.
Once testing confirms proper operation, secure any loose wiring with zip ties to prevent rattling or contact with hot engine components. Double-check all mounting hardware for tightness.
Park 25 feet from a wall in a dark area. Measure the height from the ground to the center of the headlights. Mark this height on the wall. With low beams on, adjust headlights so the brightest part of the beam is slightly below your mark.
Installation Tip: If your new LED headlights flicker or throw error codes on your dashboard, you may need to install a load resistor or anti-flicker harness. These inexpensive devices help balance the lower power draw of LEDs compared to halogen bulbs.
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlight Flickering | Vehicle's electrical system detecting lower power draw | Install anti-flicker harness or load resistor |
| One Headlight Not Working | Poor connection or damaged wiring | Check connectors, ensure proper seating, inspect for damaged wires |
| Error Codes on Dashboard | Vehicle's computer detecting changes in electrical load | Install CANbus adapters designed for LED applications |
| Poor Beam Pattern/Alignment | Incorrect installation orientation or loose mounting | Ensure headlight is properly seated and securely mounted |
| Water Condensation Inside Lens | Improper sealing or damaged gasket | Check gasket condition, apply silicone sealant if necessary |
Yes, 7x6 LED headlights offer significant advantages over traditional halogen headlights. They produce brighter, more focused illumination (typically 2-3 times brighter), which substantially improves visibility and safety during night driving. LED headlights also have a much longer operational lifespan, often lasting 30,000-50,000 hours compared to just 1,000-2,000 hours for halogen bulbs. Additionally, they draw less power from your vehicle's electrical system, reducing strain on the alternator and potentially improving fuel efficiency slightly. The light produced by LEDs also has a more natural color temperature that reduces eye fatigue during long drives.
No, 7x6 LED headlights are specifically designed for vehicles with rectangular headlight housings measuring 7 inches by 6 inches. They're commonly found in older trucks, Jeeps, and some classic cars manufactured before the widespread adoption of custom-shaped headlight assemblies. Some vehicles may require an adapter or mounting kit for proper fitment, especially if the original housing has unique retention methods or mounting points. Always verify your vehicle's headlight dimensions and mounting style before purchasing. For vehicles with different headlight dimensions, alternative sizes like 5x7, 4x6, or various round configurations are available.
Yes, most vehicle owners with basic mechanical skills can successfully install 7x6 LED headlights without professional assistance. The installation process typically involves removing a few mounting screws, disconnecting the original headlight's electrical connector, connecting the new LED headlight, and securing it in place—a process that usually takes 30-60 minutes per headlight. Numerous detailed tutorials and video guides are available online to walk you through the specific steps for your vehicle model. However, if your vehicle requires complex wiring modifications, has integrated headlight/turn signal assemblies, or if you're uncomfortable working with electrical components, seeking professional installation is advisable to ensure safety and proper functionality.
7x6 LED headlights require minimal maintenance compared to traditional headlights. Their solid-state design eliminates filaments that can break and significantly extends their operational lifespan. Regular maintenance involves occasional cleaning of the outer lens with mild soap and water to remove road grime and debris that can reduce light output. It's also advisable to periodically check the electrical connections to ensure they remain tight and corrosion-free, particularly in areas with harsh winter conditions where road salt can accelerate corrosion. Unlike halogen bulbs that dim gradually over time, LEDs typically maintain their brightness throughout their lifespan, though they may eventually require replacement after many years of service.
Yes, 7x6 LED headlights are excellent for off-road driving applications. Their superior brightness illuminates trails, obstacles, and potential hazards much more effectively than traditional halogen lights. The durability of LED technology makes these headlights highly resistant to shock, vibration, and impact—common challenges when traversing rough terrain. Additionally, their energy efficiency is particularly valuable for off-road vehicles with accessories that already place demands on the electrical system. Many 7x6 LED headlights designed specifically for off-road use offer enhanced features like extra-wide beam patterns, spot/flood combination beams, or specialized optics for maximum visibility in wilderness environments. Just be sure to check local regulations regarding off-road lighting use on public roads.
