(3722 products available)
There are several types of lithium 3v coin cell battery types available in the market depending on one's needs. Therefore, knowing the various types helps buyers choose coin batteries for certain devices.
CR2032
The CR2032 is a 3v coin cell battery with a diameter measuring 20mm and a thickness of 3.2mm. Its prime applications are in consumer electronics like wristwatches, calculators, and medical devices. It has an estimated capacity of 220mAh with a shelf life of about 10 years.
CR2025
A CR2025 battery has the same diameter as a CR2032 but is slightly thinner with a 2.5mm thickness. The small size allows it to fit in more compact electronic devices. Its typical applications include slimmer remote controls, digital thermometers, and smaller wristwatches. It has an average capacity of 160mAh and a shelf life of about 6-8 years.
CR2016
The CR2016 battery also comes with a 20mm diameter, but its thickness is only 1.6mm. This helps it fit well in devices where design and compactness go hand in hand. Its common use is in thin profile electronics like ultra-slim wristwatches and fitness trackers. It has an average capacity of 90mAh with a shelf life of around 4-6 years.
CR2450
CR2450 is a larger lithium coin cell battery since it measures 24mm in diameter and is 5mm thick. Because of its expansive capacity, it serves demanding applications that require higher power. It goes into health monitoring devices, IoT gadgets, and certain types of wearables. It has an average capacity of 600mAh with a shelf life of about 10 years.
SR626SW
The SR626SW is a silver oxide cell that runs at 1.55 volts. In addition, it has a 6.2mm diameter and a 2.6mm thickness. Its common applications are in analog wristwatches, medical devices, and other precision electronics. It has an average capacity of 40mAh with a shelf life of around 3-5 years.
CR1216
CR1216 is the ultimate thin battery measuring 12mm in diameter and 1.6mm in thickness. Its common uses are in small electronic devices. It has an average capacity of 50mAh with a shelf life of about 4 years.
Remote Monitoring Systems
The 3v lithium batteries are useful in remote monitoring systems that are situated in areas without human presence. It is in these systems that one needs to send data back to a control center. Common areas of use include environmental sensors, geological survey equipment, and infrastructure monitoring systems. These batteries endure extreme temperatures, thus making them suitable for tough outdoor environments.
Medical Devices
Lithium coin cell batteries are useful in medical tools such as pacemakers, blood pressure monitors, and portable medical diagnostic gear. These batteries provide steady power for a long time, which is vital for reliability in life-saving tools. Their compact size enables easy integration into small medical gadgets. An effective 3-volt lithium coin cell battery is crucial for ensuring the devices work properly, especially in critical health situations.
Industrial IoT Devices
Many industries have now adopted IoT technology. For instance, 3v lithium coin batteries have been useful for powering Industrial Internet of Things (IIoT) devices. They power sensors, tags, and smart devices used in production and logistics. IIoT devices widely use wireless technology for real-time data transmission and battery longevity. Such tools mainly employ the 3v lithium coin cell battery because it can withstand long periods of inactivity and prolonged use.
Automation and Control Systems
In factories with automation systems such as PLCs, and control panels, these batteries ensure data retention during power outages. They, therefore, make a great backup power source in critical industrial setups. Users can also find them in settings where storage systems and power continuity are vital for operational stability.
Security Systems
Coin batteries easily power the sensors and alarms in industrial security systems such as CCTV cameras, motion detectors, and access control systems. For optimal performance, it is important that these security devices have an uninterrupted power supply. 3v lithium coin cell batteries are known for their durability and reliable performance. This makes them suitable for such portable and wireless security gadgets.
Consumer Electronics
3v lithium coin cell batteries are one of the most common sources of power for hand-held devices like digital cameras and key fobs. Due to their compact size and great energy density, they enable these gadgets to perform for long hours. Commonly used gadgets inclusive of these batteries are remote TV controls, gaming gadgets, and portable health tracking gadgets. These batteries offer longer shelf lives, boosting the performance of devices with high battery drainage like clock memory backup systems.
Smart Wearables
Smart wearables like smartwatches, fitness bands, and health monitoring pins utilize these coin cell batteries. They need lightweight batteries with steady voltage to keep data like time, heart rate, and location in real-time. Coin cells are the most preferred option since they provide the energy needed to run sensors and small displays while remaining slim and compact. Due to this, wearables are designed to be as comfortable as possible for users and help them track fitness and health.
Insurance Systems
Coin cell batteries are also commonly used in various commercial applications such as insurance systems in the retail and hospitality industries. They help power the pen tablets, point-of-sale systems, and digital signature capture devices in such settings. Their reliability ensures continuous operations, seamless customer interactions, and secure transaction processing. These batteries power price tags, inventory scanners, and RFID systems in logistics and supply chain management.
Toys and Gadgets
The toy industry also widely uses lithium coin batteries to power electronic learning toys, remote control vehicles, and small gadgets. They give a great power-to-weight ratio which allows the toys to work without being bulky or heavy. Thus, keeping them durable and easy to replace enables endless playtime with minimal fuss. Other applications include legacy technology such as cameras, calculators, and compact tech gadgets. Their long-lasting power and easy replacement ensure their continued use in various electronics.
High Energy Density
The 3v lithium coin batteries have high energy density, hence providing a large amount of energy. This allows them to run electronic devices for long periods and be lightweight and compact.
Low Self-Discharge Rate
They have a very low self-discharge rate. This means they can hold their charge for many years when not in use. Their long shelf life makes them ideal for devices that infrequently use batteries.
Compact and Coin Shape Design
They are coin-shaped and come in various sizes. Common sizes include CR2032, CR2025, and CR2016. Their small size allows easy fitting into gadgets like watches, cameras, and medical tools.
Stable Voltage Output
For the most part, they provide steady voltage as the battery drains. This gives devices consistent power and stops performance variability as the battery runs out.
Wide Temperature Range
They can operate in wide, extreme temperatures. Thus, they are suitable for gadgets operating in such environments. Their versatility makes them a great option for outdoor and industrial applications.
Turn Off Device
Users should turn off the device before replacing the battery. This ensures that there is no power running through the old battery as it is being removed. It helps prevent any potential damage or data loss.
Open Battery Compartment
Many devices have battery compartments that are easily accessible. Such compartments snap open or slide to reveal the batteries inside. It's better to consult the user manual for location guidance on the battery compartment. Some settings may require users to use tools to remove screws or other fasteners before accessing the compartment.
Remove Old Battery
If the device uses multiple batteries, it's better to note the configuration in which they are installed. Buyers should take a picture or write it down, just in case. With gadgets that use a single battery, users should gently take out the old one. They should ensure to do it carefully so as not to damage any connectors or wiring close to it. Some devices may have a pull tab or a small spring that holds the battery in place. They should pull on this tab or gently release the spring to free the battery.
Insert New 3v Lithium Coin Cell Battery
When replacing the battery, users should ensure the new 3v lithium coin cell battery is ready. Coin batteries are circular and come in various sizes. Users should make sure they buy the same sizes so the gadgets are powered consistently. Now, they should insert the new battery into its slot. There is no need to worry because they will have noted how the old one came out earlier. Let them position the new battery the same way it was facing when they removed it. The positive (+) side should be facing a particular way, while the negative (-) side the opposite. It helps to prevent any damage to the device and stops the battery from leaking..
Close Battery Compartment
Your users should close the battery compartment once they have replaced the battery. They should ensure it is securely closed and locked into place. In devices that require screws or fasteners, they should replace and tighten these before closing the compartment. They should be cautious so that they don't overtighten as it may damage the screws or the case.
Turn On Device
Once set the battery compartment is closed, they can now turn the device back on. They should check to see if everything works as intended. If there are any issues, such as error messages or malfunctioning components, they should consult the device manual or customer service.
Regularly Check Battery Levels
It is important to check the functionality of the coin cell batteries frequently. One can use a multimeter or a battery tester to check the voltage. This helps to ensure the battery is providing the right amount of voltage. Alternatively, certain devices like power meters have built-in indicators that show whether the battery is low or needs recharging. Low voltage causes gadgets to malfunction or not work at all. Knowledge is power, and checking battery levels regularly ensures errors are detected early and minimal downtime.
Clean Battery Contacts
Dust and corrosion can accumulate on the battery contacts over time. This, in the long run, affects the performance of the device. Buyers should occasionally check and clean the contacts with rubbing alcohol and a cotton swab. This helps to remove any residue. Rinse and dry after cleaning to give users devices with better power transmission. It also prevents battery drainage before its time and ensures the gadget is working at optimal performance.
Store Properly During Inactivity
It's best for 3v lithium coin batteries to be stored in cool, dry places that are not easily accessible to children when not in use. Such conditions help maintain their charge levels and stop self-discharge. Prolonged exposure to humidity and heat damages the battery and reduces its lifespan. It also poses safety issues. If one is planning to store items for long periods, ensure the batteries are removed from devices. The devices should also be stored in a location that minimizes battery corrosion or leakage.
Replace Promptly
When the battery is low or near the end of its life, it is best to replace it promptly. This ensures the devices continue to function as intended. During low battery power, there are cases where gadgets may shut down, lose settings, or not work at all. Users should consult the user manual to understand the right replacement battery type. They should ensure they buy genuine or high-quality 问湘photopower 3v lithium batteries for optimal performance.
A1.They are commonly used in consumer electronics like digital cameras, remote key fobs, and handheld gaming consoles. Due to their small size, they are also used in medical devices like hearing aids and blood glucose monitors. They power devices like portable cardiac monitors, pacemakers, and sleep apnea devices. Retail and industrial applications use them in RFID tags and inventory management systems. They are integrated into smartwatches and fitness trackers to monitor health and activity. Security devices like backup power in security alarms and remote sensors also utilize these batteries. Due to their reliable power, they are used in compact cross-technology devices.
A2.It is not ideal to use 3v lithium coin cell batteries interchangeably, even though there are enticing factors. They come in different sizes and chemistries, which will likely create compatibility issues. Some may be slower to charge than others, while some take slightly more time. Others might not work at all because the size is too large; hence, it cannot fit into the device. The current output may differ, which can cause inconsistent device performance or potential damage. Additionally, using different batteries voids one's warranty. Therefore, always consult the user manual to ensure the right battery is used.
A3.Most of the lithium 3v coin batteries are non-rechargeable. But some are indeed rechargeable. The recharge time depends on various factors such as battery capacity, current input, and state of charge when charging begins. A typical lithium coin cell battery has an average capacity of around 200-240mAh. It takes anywhere from 1 to 3 hours on average to recharge these batteries fully with a standard charger. Longer periods are possible if there is low current during charging. It is also important to note that one should always employ a compatible charger for them to avoid damage. What makes them more suitable is that they have a long shelf life of 10-15 years.
A4.3v lithium coin cell batteries can be shipped internationally, but they should meet the strict regulations they need to follow. Such regulations are set to ensure safe handling and transportation. Many countries have restrictions on shipping such batteries, especially in bulk. When dealing with shipments, business owners should work with couriers having experience transporting lithium batteries. They will ensure shipments follow packing, labeling, and documentation requirements. Also, be aware of any legal restrictions on shipping lithium ion batteries to particular countries.