20m3 load volume dump truck

Types of 20m3 load volume dump truck

A 20m3 load volume dump truck, also known as a tipper truck, is a truck used to transport materials used in construction. The rear part of the dump truck can be loaded and unloaded, or both, by a hydraulic lift system. The 20m3 load volume dump truck is more efficient when transporting loose material over rough terrain. A 20m3 load volume dump truck comes in various types, each with its benefits and applications. Here are some of them:

• Standard dump truck

  Standard dump trucks are also known as conventional dump trucks. They are the most common type of dump trucks. They have an open-top cargo area with a hydraulic lift at the back to dump the load. Standard dump trucks are ideal for quick loading and unloading and are often used in construction sites.

• Transfer dump truck

  Transfer dump trucks are standard trucks that are designed with a dump body. The truck is equipped with a trailer that can also be loaded and unloaded. The trailer carries an additional dumpable payload. Transfer dump trucks can transport more material than standard dump trucks. The transfer part also acts as a ballast to enhance stability.

• Side dump truck

  Side dump trucks are designed with two large cylinders that allow the cargo to be dumped on either side of the truck. This design allows the side dump truck to unload materials faster and can be operated on a more congested area than the standard dump truck. Side dump trucks are more efficient when transporting large material like pipes.

• Mini dump trucks

  Mini dump trucks are compact and smaller dump trucks that are designed to transport smaller loads. They are often used in residential areas and small construction sites. Their smaller and compact design makes them ideal for loading and unloading in a limited space. They are also referred to as high tip dump trucks.

• Articulated dump trucks

  Articulated dump trucks are large dump trucks that are designed with a fully pivoting dump body. The dump body and the cab are connected by a pivot joint. This design allows the articulated truck to maneuver on rough and tight terrains. They have good traction and are ideal for off-road applications.

Specifications and maintenance of 20m3 load volume dump truck

Here are some of the key specifications of a 20m3 load volume dump truck:

• Capacity

  Load volume dump trucks have different carrying capacities. A 20m3 dump truck can carry loads weighing between 40,000 to 60,000 pounds. That is about 20,000 to 30,000 kilograms.

• Engine Power

  The engine power of load volume dump trucks also varies. A 20m3 dump truck has an engine power ranging from 400 to 600 horsepower. This is about 298 to 447 kilowatts.

• Dimensions

  Load volume dump trucks have different dimensions depending on the model and make. The length of a 20m3 dump truck ranges from 7.5 to 8.5 meters. This is about 25 to 28 feet. The width is about 2.5 to 3 meters (8 to 10 feet), and the height is about 3 to 4 meters (10 to 13 feet).

• Bed Dimensions

  A 20m3 dump truck has a bed length of about 5.5 to 6.5 meters (18 to 21 feet). The bed width is 2.3 to 2.6 meters (7.5 to 8.5 feet), and the bed height is about 0.8 to 1 meter (2.5 to 3 feet).

• Axles

  A 20m3 load volume dump truck has two to five axles. Each axle has a load capacity of about 10,000 to 20,000 pounds (about 4,500 to 9,000 kilograms).

• Tires

  The size of the tires also varies depending on the make and model of the truck. A 20m3 load volume dump truck uses tires with a diameter of about 0.9 to 1.2 meters (about 36 to 48 inches). Each tire has a load capacity of 5,000 to 10,000 pounds (about 2,300 to 4,500 kilograms).

• Braking System

  Some common braking systems used in 20m3 load volume trucks include air-operated disc brakes and hydraulic drum brakes. The braking system has a braking force of about 20,000 to 40,000 pounds (about 9,000 to 18,000 kilograms).

Here are some common maintenance practices for 20m3 load volume trucks:

• Inspect and replace worn-out or damaged tires.
• Check and maintain proper tire pressure.
• Clean the air filter and replace it if necessary.
• Carry out regular engine oil changes.
• Inspect and replace worn-out engine components.
• Inspect and replace worn-out brake components.
• Lubricate all the moving parts of the dump truck.
• Check and maintain proper axle alignment.
• Inspect the dump body for wear and repair it if necessary.
• Inspect the hydraulic system and repair any leaks.
• Wash the dump truck to prevent rust.
• Perform regular inspections and maintenance on the suspension system.
• Perform routine vehicle maintenance such as tuning up the engine.

How to Choose 20m3 Load Volume Dump Truck

Choosing the right 20m3 dump truck for any business is an important decision that requires careful consideration of various factors. Here are some key factors to consider:

• Carrying capacity: Consider the volume of materials to be transported and the truck's load-carrying capacity. Underrating or overrating the truck may result in operational inefficiencies and safety risks.
• Engine power: The 20m3 dump truck's engine power should be considered. For any business that involves frequent loading and unloading in hilly or steep areas, a truck with a powerful engine is ideal.
• Durability and reliability: A reliable and durable dump truck is an important asset for any business. It minimizes breakdowns and reduces maintenance costs. Before choosing a 20m3 load volume dump truck, investigate the brand's reputation for reliability and durability.
• Fuel efficiency: Fuel cost is a major expense in truck operation. Therefore, when choosing a 20m3 dump truck, consider fuel efficiency. Some trucks have advanced engine technologies that improve fuel efficiency.
• Maintenance and service: Consider the ease of servicing and maintenance of the 20m3 dump truck. Some trucks have accessible engine compartments that make it easy to access and perform routine maintenance.

How to DIY and Replace 20m3 Load Volume Dump Truck

Replacing a 20m3 load volume dump truck can be a challenging task, but with the right tools and knowledge, it can be done. Here are some steps on how to DIY and replace a 20m3 load volume dump truck:

Firstly, to replace a dump truck, one must have the following tools:

• Socket set
• Wrench set
• Pliers
• Hammer
• Screwdrivers
• Torque wrench
• Oil filter wrench
• Jack and jack stands
• Lug nut wrench
• Multimeter
• Wire strippers and connectors
• Diagnostic scanner

With the right tools in place, here are the steps to follow:

• 1. Choose a Safe Location
• 2.Gather the Necessary Tools
• 3.Discharge the Air System
• 5.Lift the Truck
• 6.Remove the Old Dump Body
• 7.Prepare the New Dump Truck
• 8.Install the New Dump Truck
• 9.Connect the Hydraulic System
• 10.Connect the Electrical System
• 11.Check for Leaks and Test Functionality
• 12.Lower the Truck and Finalize Installation

Following these steps will ensure that the replacement of the dump truck will be successful.

Q&A

Q: How much does a 20m3 dump truck weigh?

A: The weight of a 20m3 dump truck varies depending on its construction and the materials used. Generally, it can have an operating weight of about 15 tons.

Q: How much can a 20m3 dump truck carry?

A: A 20m3 dump truck can carry a maximum load of up to 15 tons. However, the maximum load it can carry depends on the type of material being transported since some materials are lighter than others.

Q: What is the length of a 20m3 dump truck?

A: The length of a 20m3 dump truck differs based on its model and manufacturer. Typically, it ranges from 5.5 meters to 7 meters. This affects its maneuverability in different sites.