All categories
Featured selections
Trade Assurance
Buyer Central
Help Center
Get the app
Become a supplier
(22604 products available)
Acrylic putty powder
Acrylic putty powder is a water-based substance made with acrylic resins. Since it's water-based, it's easier to clean up, and it gives a smooth surface when applied. It's great for filling in small cracks and imperfections, especially on drywall or concrete. Unlike other putties, it doesn't shrink much after drying, so it's really good for finishing work. It's also flexible enough to handle small movements in walls without cracking.
Epoxy putty powder
This type of putty is stronger than acrylic putty and is made from epoxy resin. It can handle very high temperatures and heavy loads, which is why people use it for repairing machinery, automotive parts, or in construction where structures face a lot of stress. Once it hardens, it's almost impossible to sand but is super durable. It's a two-part system, which means you have to mix it with a hardener to use it.
Polyester putty powder
Polyester putty powder, which is also called car body filler or auto putty, is more commonly used in the automobile industry and by car repair shops. They apply it on car bodies to fill cracks, dents, and holes before repainting. It packs well and can be sanded to form very smooth surfaces. With the addition of a hardener, the resin will cure and provide an extremely tough, long-lasting solution to auto fillers.
Joint compound putty powder
This is a special putty used by builders. It fills in the joints between drywall sheets during building projects. It's thicker than some other putty powders but is very good at making walls perfectly smooth. Joint compound putty powder dries slowly, giving people time to shape it before it hardens completely. When it does harden, it can be sanded down to create seamless wall surfaces ready for painting.
Oil-based putty powder
Made with linseed oil, this type of putty powder is good for outdoor use because it resists moisture and weather changes. It fills gaps and cracks in wood, metal, or masonry while preventing further damage from water. It dries slowly but hardens very tough and long-lasting. It's often used for priming wood before painting so that the paint job lasts longer.
Filling and repairing walls
Putty powder is used a lot to fill holes, cracks, and imperfections in walls. Painters and builders use it to make surfaces perfectly smooth before painting. This lets the paint look nicer and go on evenly. It fills in drywall nicks or dinged plaster so walls look new again. Think of putty powder as the wall's moisturizer that smooths out all fine lines before it's ready for glam!
Preparing surfaces for painting
Carpenters and painters apply putty powder on trim, doors, and moldings to create a smooth base for paint or stain. The powder fills tiny gaps and wood grain so the final coat of paint has a flawless finish. This helps prevent the wood from rotting over time.
Auto bodywork and repairs
Auto mechanics and body shops use putty powder, specifically polyester filler, to repair dents, scratches, and rust on vehicles. It enables them to reshape damaged areas so car exteriors look like new again. It can bond to metal or fiberglass.
Furniture repair and finishing
Furniture makers apply putty powder to repair cracks, knotholes, and imperfections in wood pieces. This allows them to maintain high quality and shape before finishing. It repairs scratched tabletops or worn chair arms too so they don't need replacing. Putty powder lets old wood furniture look great again.
Flooring installation and repair
Putty powder offers an excellent solution for filling gaps and seams between flooring materials, such as tiles and hardwood. This makes floors level and smooth, preventing squeaks or damage over time. Apply putty powder before laying down laminate or vinyl for a better finished look too. It seamlessly blends areas around floor vents and moldings.
Concrete and masonry work
Builders use putty powder to fill cracks and holes in concrete walls, sidewalks, driveways, and patios. It helps to create a solid surface for painting or sealing. This extends life by strengthening weakened areas. Putty powder can even fill in gaps between brick or stone for a uniform look.
Smooth interior finishes
Putty powder fills holes and imperfections in walls, ceilings, and wood surfaces. This creates a smooth base for painting or wallpapering. It makes the final finish look better and improves the appearance of a room.
Energy-efficient sealing
Putty powder seals gaps around windows, doors, and trim. This helps reduce energy bills by preventing drafts. Homes stay warmer in winter and cooler in summer with less reliance on heating and cooling.
Moisture and weather resistance
Oil-based putty powder protects wood from moisture damage. It coats surfaces to prevent rot, especially on exterior trim. With putty powder, wood lasts longer even when exposed to rain and other elements.
Versatile repairs
Putty powder is used to repair not only walls but also cracks in concrete, tiles, and even car bodywork. It's handy for many fixes around the house. It saves time by allowing for one product to handle multiple types of damage.
Easy application
Putty powder spreads easily with a putty knife or trowel. Many formulas dry quickly too, so repairs can be made and finished in a short time. This allows projects to be completed sooner without long waits for drying.
Sanding and painting ready
After drying, putty powder can be sanded down to a perfect finish. It can be painted over with primer and paint so patched areas blend in seamlessly. Walls and trim look like new once again.
Composition
Putty powder is made from a mix of substances. These include gypsum (also called calcium sulfate) or white cement, powdered limestone, and additives like resins and binders. Different types of putty use different combinations of these materials.
Particle size
The gypsum or cement particles are very small, usually between 200 to 400 micrometers in size. This gives the paste a smooth texture when applied to walls or other surfaces.
Water ratio
Putty powder is mixed with water to form a paste. Usually, one part putty powder is combined with around 0.8 to 1.2 parts water. This creates a workable consistency.
Drying time
Depending on the environment conditions like humidity, putty paste will take around 30 minutes to 2 hours to dry after being applied.
Setting time
After application, putty takes around 24 hours to fully harden and set before it can be sanded or painted over.
Sandability
Once dried, putty powder can be sanded easily with fine-grit sandpaper to achieve a smooth finish on walls.
Strength
Putty powder creates a strong bond when applied to surfaces, filling cracks effectively while holding paint and preventing re-emergence of fissures.
pH level
Putty powder typically has a neutral pH around 7 to 8, making it safe to handle and non-corrosive.
Type of surface
Choose putty powder based on what type of surface it will go on. For walls and ceilings, go with acrylic or joint compound putty. These make things smooth and fill little gaps. For fixing wood furniture or trim, get oil-based putty. It sticks well and sands nicely. If working on cars or metal pieces, use epoxy putty, which creates a tough repair.
Size of repair
Pick the right putty based on how big the job is. Smaller repairs call for lightweight compounds, like plaster for cracks or nail holes. Bigger jobs need heavy-duty fillers that set strongly, like joint compound or epoxy putty. This ensures the material won't sag or weaken in larger spaces.
Drying time
Check if it sets fast enough. Some putty compounds dry really quick, while others take their sweet time to harden. Consider how long the project can wait before needing sanding or painting. For projects that need to move quickly, choose putty with a fast drying time. For more laid-back jobs, go with putty that takes longer to cure.
Flexibility and sandability
Look for putty that is flexible enough to handle tiny shifts in surfaces, like walls settling or wood expanding. At the same time, ensure it can be sanded down easily after curing, too. This allows for achieving a perfectly smooth finish. Test reviews to confirm the putty strikes this balance well, as too much give or too little can crack finishes over time.
Paint compatibility
Make sure the putty chosen can be painted over once it cures. Some compounds work better under both latex and oil-based paints than others. Read instructions to confirm the putty won't repel paint and ruin efforts to match surfaces for a seamless look.
A1. Putty powder is a type of joint compound. It gets used for filling nail holes, cracks, and surface imperfections on walls, ceilings, and other areas where a smooth finish is desired. The powder gets mixed with water to form a paste. It is then applied over drywall seams or on any surface that needs repair, providing a flat, even surface ready for priming and painting.
A2. When applying putty powder on walls before painting, it makes the walls feel smooth and new again. The putty fills in any cracks, holes, or marks, so the wall feels even. When painting over the putty, the paint goes on evenly. This makes the wall look nice and doesn't show any imperfections. The added putty also makes paint extra durable and helps it stick well.
A3. Putty powder repairs are made to be tough and last a long time. It dries hard like cement and creates a strong bond with whatever surface it is applied to. The powder fills in all gaps and cracks to eliminate weak spots. When primed and painted, the putty forms a solid barrier against moisture and other elements. Together, this strengthens the repair and reduces the chance of cracks or damage over time.
A4. Applying putty powder takes some time since each layer must dry completely before sanding and adding more coats. Although a single application is quick, achieving a flawless finish requires patience as multiple layers may be needed. Drying time varies based on temperature and humidity but could take several hours. Despite this, the effort results in durable, professional-quality wall finishes that are worth the wait.
